F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » MR2 Intercooler Query Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
JustenGT4 Forums Junkie Location: Canberra Registered: June 2003	Re: MR2 Intercooler Query Fri, 08 October 2004 03:41 Just a caution on that pump... is that for a spray bar or water injection. If the latter then's she's no good sorry. You need at least 40psi water pressure over boost to get a half decent atomisation. The higher the pressure then generall the better the atomisation. I runa 100psi shurflo pump in one car and a 120psi Aquamist pump in the other. Also again if it's a WI setup, definitely run a solenoide valve in the water line as hydraulic lock of the engine is a real risk without it. My water tank is in the boot but vac at idle is still strong enough to pull water into the intake system and then ater you shut down this can continue via the syphoning effect. I was very lucky once and immediately fitted a solenoide valve. Other that WI is very effective [Report message to a moderator]

	Subject	Poster	Date
	MR2 Intercooler Query	Skip	Wed, 06 October 2004 13:11
	Re: MR2 Intercooler Query	davedave	Wed, 06 October 2004 14:01
	Re: MR2 Intercooler Query	Skip	Wed, 06 October 2004 23:49
	Re: MR2 Intercooler Query	Joshstix	Wed, 06 October 2004 23:54
	Re: MR2 Intercooler Query	davedave	Thu, 07 October 2004 00:05
	Re: MR2 Intercooler Query	Joshstix	Thu, 07 October 2004 00:22
	Re: MR2 Intercooler Query	Spanktown	Thu, 07 October 2004 01:04
	Re: MR2 Intercooler Query	MR. 2	Thu, 07 October 2004 01:45
	Re: MR2 Intercooler Query	Skip	Thu, 07 October 2004 01:47
	Re: MR2 Intercooler Query	Spanktown	Thu, 07 October 2004 01:55
	Re: MR2 Intercooler Query	Joshstix	Thu, 07 October 2004 05:15
	Re: MR2 Intercooler Query	MR. 2	Thu, 07 October 2004 05:44
	Re: MR2 Intercooler Query	Joshstix	Thu, 07 October 2004 05:53
	Re: MR2 Intercooler Query	Spanktown	Thu, 07 October 2004 05:49
	Re: MR2 Intercooler Query	Skip	Thu, 07 October 2004 07:42
	Re: MR2 Intercooler Query	JustenGT4	Fri, 08 October 2004 03:41
	Re: MR2 Intercooler Query	Skip	Fri, 08 October 2004 04:37
	Re: MR2 Intercooler Query	JustenGT4	Fri, 08 October 2004 05:22

Previous Topic:	Installing Camber tops
Next Topic:	difference between horizontal and vertical Webers

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.