F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » mhg/o-ring dilemma Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Jayem Forums Junkie Location: Finland Registered: November 2002	mhg/o-ring dilemma Sun, 10 October 2004 11:10 I tried to search but didn't find anything useful regarding to o-ring design or dimensions. My plan is to use copper head gasket and o-rings. Look the cross section pic I made. Does the design or the dimensions look anything right. The red part is the o-ring. Yellow part is the head gasket. Rest (white) is the block. The plan is to machine 2mm deep, 3mm wide groove in the block and o-ring will be 2.98mm thick. This 2.98mm is based on assumption that the copper sheet will be 1.00mm thick. Head deck surface will be plain. I can cut the head gasket by laser and I have already made cad drawing of the HG. Once the annealed(correct word?) copper head gasket is assembled it will be compressed 0.02mm and o-rings will seal the combustion chambers. Would this work??? here's the cad drawing of the design. Change it the way you see better! http://toyotacover.50megs.com/sekalaiset/liekki rengas.dwg [Report message to a moderator]

	Subject	Poster	Date
	mhg/o-ring dilemma	Jayem	Sun, 10 October 2004 11:10
	Re: mhg/o-ring dilemma	allencr	Sun, 10 October 2004 13:36
	Re: mhg/o-ring dilemma	Ra28Freak	Sun, 10 October 2004 15:12
	Re: mhg/o-ring dilemma	shinybluesteel	Mon, 11 October 2004 07:44
	Re: mhg/o-ring dilemma	ed_ma61	Mon, 11 October 2004 08:12
	Re: mhg/o-ring dilemma	Jayem	Mon, 11 October 2004 10:42
	Re: mhg/o-ring dilemma	Ra28Freak	Mon, 11 October 2004 11:59
	Re: mhg/o-ring dilemma	Jayem	Mon, 11 October 2004 12:45

Previous Topic:	GZ20 diagnostic??
Next Topic:	im sellin extractors....whats a good price????

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.