Toymods Car Club Inc: Members Rides => Dodgy Haro's Boro AE86 - Drift Pig

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Members Rides » Dodgy Haro's Boro AE86 - Drift Pig - One more time! Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Dodgy_Haro
Forums Junkie

Location:
Brisbane
Registered:
July 2002

Re: Dodgy Haro's Boro AE86 - Drift Pig - One more time!	Sun, 17 October 2004 12:01

Quick update - finally had some spare time so I stripped the interior this arvo, about 2 hours work ... amazing what you can dimantle with just 3 spanners and a screw driver. At least it was a gloomy day so I didn't suffer any heatwaves as I usually do in the wrecking yards. Now the rust repairs to come, at least to the parts which contribute to the rigidity of the car itself ... Also some more bits I have acquired for the car: 1) 20 valve factory flywheel for $50 2) 2nd set of 4-1 exhaust headers - these ones came off someone who had originally purchased them off Anthony Kellam but decided to sell them after going for a 4AGTE. I got them for $200 which saved me $50 but I'm gonna have to modify them to match up with a 20 valve motor - no big feat as I've seen Speedcore's car which has done the same thing with these headers. 3) pair of 14x7 longchamp XR4's with zero offset from Importbitz - due to arrive any day now ... these will go on the front and match my centrelines at rear perfectly being the same offset & size. 4)Some RCA's from Techno Tuning - kudo's to Gabe once again - they had a sale so I got $10 USD off ... 35mm RCA's arrived within a week and all for under $100AUD. 5) AE86 boss kit - thanks to Skaney for selling me his - he's a reliable seller and top bloke. 6) blacktop quads - due to arrive anyday now with the Option 1 Garage container - Shano packed them for me personally in Japan so I just have to make sure they don't sell it when it arrives here in Brisbane anyday now. Next step is to tackle the rust in the body, rollcage and some paint ... need to check up on legalities of a welded rollcage here in Queensland but a mate's agreed to do the work for around $400. Dunno how long until the next update but it is slowly starting to gain momentum ... [Updated on: Sun, 17 October 2004 22:40] [Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Sun Aug 3 14:37:11 UTC 2025

Total time taken to generate the page: 0.0042948722839355 seconds

.:: Contact :: Home ::.