| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
Re: unleaded filler neck in a '22
|
Mon, 18 October 2004 01:18
|
 |
Hey,
I welded it about 1 inch from the start of the neck. Yeah probably should be 2 inch.
But i'd suggest taking your neck out, sit the unleaded thing in it and go to your local fuel station and test it out make sure the pump nozzle slides all the way in.
www.bd4s.com.au 
rebuild is moving slowly.. i've supplied Graham with 4 replacement rods. He is currently fitting ARP bolts to them, giving them a hone and balancing whole assembly up again. Also going to hone the block again and i'll put new rings and bearings in. Figure might as well while its apart.
Should be ready to pickup parts from Graham on Saturday I hope. So only a few more weeks before it sees the road again
|
|
|
