F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Corona Mk2 Conversion Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
7M-Brisbane Forums Junkie Location: Brisbane Registered: November 2002	Re: Corona Mk2 Conversion Mon, 18 October 2004 13:21 7MGTE Shame you're in Melbourne as I have a shitload of MX13 bits you may have been able to use. Intercooler is a pain, but something with slightly forward-facing outlet/inlet would suit ok (run piping inside front bar)... an EVO 6 cooler or similar would probably do, and would be up to a stock-ish 7M no problem at all. Would romp in low 13's with a fairly basic 7M setup. The W55/W57 is the late Celica box that will bolt up with the correct "M" bellhousing (early one is W50 and not worth your time). The W58 is actually the "Supra" box and in my experience holds up perfectly well in a much heavier car with the same engine and a rather solid clutch setup! A basic brake upgrade is quite straightforward, go here: http://www.turbosupras.com/~lmdwyer/corona/brakes. html. Personally I'd investigate later model 4-Runner calipers and Magna discs as they are much thicker and a similar diameter if doing it again. [Updated on: Mon, 18 October 2004 13:33] [Report message to a moderator]

	Subject	Poster	Date
	Corona Mk2 Conversion	Pure_In_Sanity	Sun, 17 October 2004 03:18
	Re: Corona Mk2 Conversion	79rollaboy	Sun, 17 October 2004 04:49
	Re: Corona Mk2 Conversion	wilbo666	Sun, 17 October 2004 06:16
	Re: Corona Mk2 Conversion	Pure_In_Sanity	Sun, 17 October 2004 06:21
	Re: Corona Mk2 Conversion	Norbie	Sun, 17 October 2004 06:44
	Re: Corona Mk2 Conversion	gianttomato	Sun, 17 October 2004 07:38
	Re: Corona Mk2 Conversion	Pure_In_Sanity	Sun, 17 October 2004 08:09
	Re: Corona Mk2 Conversion	gianttomato	Sun, 17 October 2004 11:03
	Re: Corona Mk2 Conversion	joecoolmk2	Mon, 18 October 2004 00:07
	Re: Corona Mk2 Conversion	Pure_In_Sanity	Mon, 18 October 2004 08:15
	Re: Corona Mk2 Conversion	7M-Brisbane	Mon, 18 October 2004 13:21
	Re: Corona Mk2 Conversion	Pure_In_Sanity	Tue, 19 October 2004 08:54
	Re: Corona Mk2 Conversion	gianttomato	Tue, 19 October 2004 09:19
	Re: Corona Mk2 Conversion	Pure_In_Sanity	Tue, 19 October 2004 09:28
	Re: Corona Mk2 Conversion	mrshin	Sat, 04 June 2005 13:38
	Re: Corona Mk2 Conversion	Pure_In_Sanity	Sun, 05 June 2005 06:19
	Re: Corona Mk2 Conversion	ozzy31	Fri, 03 June 2005 21:32

Previous Topic:	Glass fiber hatch and panels
Next Topic:	T50 won't slide off engine

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.