Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Where 2 go 4 Cressida manual conversion

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
wilbo666
Forums Junkie


Location:
Brisbane
Registered:
May 2002
Re: Where 2 go 4 Cressida manual conversion Tue, 19 October 2004 10:43 Go to previous messageGo to previous message
CrUZsida wrote on Tue, 19 October 2004 19:27


The GX61 bracket all most bolts up.
The height and angle are correct, but the bolt holes into the underside of the dash are about an inch out.
I drilled another hole in between the 2 holes in the bracket, and am using this.

But the position of the pedal is fine.

Good luck in finding the parts.
I'm not sure if MX62 or MX32/36 cressida's have the same clutch pedal bracket, as once I found the GX61, I stopped looking.


GX61's are pretty well MX62's with 1g's right? Well I know for a fact that ST141 and RA6X pedals are not a 100% bolt in fitment to a MX62 (so maybe ST141 and RA6X are a bolt in to MX73's? I don't know!). The ST141 and RA6X do bolt to the firewall fine, but do not bolt underside of the dash (fall short from reaching), I just made a bracket up. Also I had to bend the ST141 pedal I ended up using, and then chop off the foot piece (because of the bending it was sitting at a stupid angle!) and weld it back on level. Smile

Quote:


So, the GA and MA70's will fit with the right bellhousing, what is the right bellhousing?
Is it custom, or interchangeble with another box or something similar?



Prbly best to go off actual gearbox models, and not the cars they came out of. W55,W57 and W58's will all bolt up to the bellhousing (I got my gearbox out of a car I specifically wrecked, the price was right Smile, I mean heck it made me money, but it does have the crappiest ratios out of the bunch....)

On that note you will need a bellhousing out of either an MA61 (come with a 5me and w58 stock) or MA70 NON turbo (come with 7mge and w58 stock).

BTW in case you don't know I've done an auto -> manual on my MX62 (so I have been in the same boat from personal experience!), a little different I know, but slightly harder also if ya ask me (I had to modify my gearbox crossmember, shifter opening on the car and also the clutch pedal business seems harder than what andrew went through Razz) Wink

Cheers
Wilbo
  Send a private message to this user    

SubjectPosterDate
Read Message   Where 2 go 4 Cressida manual conversion IcemanWed, 29 January 2003 04:25
Read Message   Re: Where 2 go 4 Cressida manual conversion Cressida SupraFri, 07 February 2003 15:34
Read Message   Re: Where 2 go 4 Cressida manual conversion ROBBO_ma61Mon, 10 February 2003 11:31
Read Message   Re: Where 2 go 4 Cressida manual conversion Cressida SupraMon, 10 February 2003 13:46
Read Message   Re: Where 2 go 4 Cressida manual conversion BrowndogMon, 10 February 2003 11:47
Read Message   Re: Where 2 go 4 Cressida manual conversion wilbo666Tue, 11 February 2003 04:09
Read Message   Re: Where 2 go 4 Cressida manual conversion Cressida SupraTue, 11 February 2003 15:07
Read Message   Re: Where 2 go 4 Cressida manual conversion BrowndogTue, 12 October 2004 02:19
Read Message   Re: Where 2 go 4 Cressida manual conversion wagonistTue, 12 October 2004 02:23
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaTue, 12 October 2004 03:15
Read Message   Re: Where 2 go 4 Cressida manual conversion BrowndogSun, 17 October 2004 11:32
Read Message   Re: Where 2 go 4 Cressida manual conversion celicamadMon, 18 October 2004 11:51
Read Message   Re: Where 2 go 4 Cressida manual conversion pannelvan_screemaMon, 18 October 2004 14:39
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaMon, 18 October 2004 14:56
Read Message   Re: Where 2 go 4 Cressida manual conversion wilbo666Tue, 19 October 2004 00:17
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaTue, 19 October 2004 00:54
Read Message   Re: Where 2 go 4 Cressida manual conversion dingalingTue, 19 October 2004 03:39
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaTue, 19 October 2004 03:47
Read Message   Re: Where 2 go 4 Cressida manual conversion dingalingTue, 19 October 2004 04:48
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaTue, 19 October 2004 04:51
Read Message   Re: Where 2 go 4 Cressida manual conversion dingalingTue, 19 October 2004 05:00
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaTue, 19 October 2004 05:03
Read Message   Re: Where 2 go 4 Cressida manual conversion dingalingTue, 19 October 2004 05:09
Read Message   Re: Where 2 go 4 Cressida manual conversion wilbo666Tue, 19 October 2004 05:14
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaTue, 19 October 2004 05:16
Read Message   Re: Where 2 go 4 Cressida manual conversion colouring_in_bookTue, 19 October 2004 08:53
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaTue, 19 October 2004 08:57
Read Message   Re: Where 2 go 4 Cressida manual conversion colouring_in_bookTue, 19 October 2004 09:02
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaTue, 19 October 2004 09:03
Read Message   Re: Where 2 go 4 Cressida manual conversion colouring_in_bookTue, 19 October 2004 09:17
Read Message   Re: Where 2 go 4 Cressida manual conversion CrUZsidaTue, 19 October 2004 09:27
Read Message   Re: Where 2 go 4 Cressida manual conversion  wilbo666Tue, 19 October 2004 10:43
Read Message   Re: Where 2 go 4 Cressida manual conversion colouring_in_bookTue, 19 October 2004 09:53
Read Message   Re: Where 2 go 4 Cressida manual conversion manmx83Tue, 19 October 2004 13:31
Read Message   Re: Where 2 go 4 Cressida manual conversion manmx83Tue, 19 October 2004 13:37
Read Message   Re: Where 2 go 4 Cressida manual conversion BrowndogFri, 22 October 2004 09:14
Previous Topic:Mx 83 cressida
Next Topic:3sfe camry engine differences

Goto Forum:
-=] Back to Top [=-

Current Time: Sat Jul 19 06:11:56 UTC 2025

Total time taken to generate the page: 0.0048971176147461 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.