Location: VIC, Sth Frankston.
Registered: July 2003
Re: 21R-Z (RA60 + SC14)
Tue, 19 October 2004 10:50
gianttomato wrote on Tue, 19 October 2004 19:10
As above.
Also you may wish to see if a 22RE manifold bolts up - it will look a lot tidier than the 21R carb manifold and will greatly simplify plumbing. You might even want to consider running the analogue EFI, a rising rate fuel pressure regulator and boost retard on the dizzy.
Interesting project.
Been there, done that.
The 22RE manifold doesn't bolt up. The bolt holes on the 21R head would foul on the injectors... I made up an adaptor plate and had it all mounted. But yeah, never went thru with it. Kinda gave up.
Also thanks guys for the input regarding the belt slippage. I'll try the V belt at first, but if it does slip, ill swap the ribbed pulley back on and go from there.
EDIT: Thought I'd add some pics of that trial and error...
Sorry bout the size of the pics. The 5m-e throttle body sure looks great tho.
Tue, 19 October 2004 10:50
