| Author | Topic |
|---|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 2TG HEADS
|
Thu, 17 October 2002 05:15
 
|
 |
Rob,
The 11111-88220 Head has the small valves. All heads after 88222, 88260 and 88261 have the same size valves. I am unsure of the valve sizes in the 88262 (Unnumbered) Head. The 22860 and 22261 had increased webbing for a slightly stronger head and were typically EFI heads. The 88220 was only ever carby and the 88222 head was mostly carby fed.
Cam sizes did vary I haven not the exact figures for all cams. I havethe 88220 and 88222 specs somewhere.
Eggman,
Yamaha made ALL the 2TG heads. If they are 8826x Heads I'll give you $300 for the lot if you are in Sydney and the heads are in usable condition !
|
|
|
| | Subject | Poster | Date |
|---|
 |
2TG HEADS
|
egg man | Tue, 15 October 2002 10:04 |
|
Re: 2TG HEADS
|
TurboRA28 | Wed, 16 October 2002 00:23 |
|
Re: 2TG HEADS
|
inferno | Wed, 16 October 2002 14:22 |
|
Re: 2TG HEADS
|
egg man | Fri, 18 October 2002 14:08 |
|
Re: 2TG HEADS
|
thetoyman75 | Thu, 17 October 2002 05:15 |
|
Re: 2TG HEADS
|
inferno | Thu, 17 October 2002 06:39 |
|
Re: 2TG HEADS
|
thetoyman75 | Thu, 17 October 2002 07:14 |
|
Re: 2TG HEADS
|
BigBadBenny | Fri, 18 October 2002 09:42 |
|
Re: 2TG HEADS
|
thetoyman75 | Mon, 21 October 2002 00:14 |
|
Re: 2TG HEADS
|
inferno | Mon, 21 October 2002 07:41 |
|
Re: 2TG HEADS
|
thetoyman75 | Tue, 22 October 2002 01:37 |
|
Re: 2TG HEADS
|
thetoyman75 | Tue, 22 October 2002 01:40 |
|
Re: 2TG HEADS
|
batesy | Wed, 23 October 2002 10:57 |
