Toymods Car Club Inc: Tech & Conversions => Getting rims made for an MA61.

Toymods Car Club
www.toymods.org.au

F.A.Q.

Toymods » Tech & Conversions » Getting rims made for an MA61. Show: Today's Posts :: Show Polls Email to friend

Author

Topic

bbaacchhyy
Forums Junkie

Location:
Adelaide
Registered:
September 2003

Re: Getting rims made for an MA61.	Sun, 24 October 2004 21:55

Josh, Got my car on the ground yesterday, and can give you the following measurements ; 16x8 Simmons, +25 offset - clearance to the outside of the flare on the front guard as 18mm (from the bag part of the tyre). 17x8 CSA Gladiators +6 offset - clearance to the outside of the flare on the front guard as 8mm (from the bag part of the tyre - note that this gives only about 2mm clearance to the INSIDE of the flare). 17x8 CSA Gladiators +6 offset - clearance to the outside of the flare on the rear guard as 43mm with no spacer at all, but with thicker Merc discs and MS123 hubs (from the bag part of the tyre - note that this gives only about 25mm clearance to the INSIDE of the flare). Hope this helps Cheers Michael B [Report message to a moderator]

Send a private message to this user

[Message index]

Subject Poster Date

Read Message Getting rims made for an MA61. joorsh Wed, 20 October 2004 00:01
Re: Getting rims made for an MA61. bbaacchhyy Wed, 20 October 2004 00:46
Re: Getting rims made for an MA61. HyDrA Wed, 20 October 2004 00:51
Re: Getting rims made for an MA61. draven Wed, 20 October 2004 01:07
Read Message Re: Getting rims made for an MA61. bbaacchhyy Wed, 20 October 2004 01:37
Re: Getting rims made for an MA61. BlackSupra Wed, 20 October 2004 02:11
Re: Getting rims made for an MA61. joorsh Wed, 20 October 2004 03:11
Re: Getting rims made for an MA61. bbaacchhyy Wed, 20 October 2004 03:26
Read Message Re: Getting rims made for an MA61. bbaacchhyy Thu, 21 October 2004 02:49
Re: Getting rims made for an MA61. joorsh Thu, 21 October 2004 11:04
Re: Getting rims made for an MA61. bbaacchhyy Thu, 21 October 2004 21:30
Re: Getting rims made for an MA61. joorsh Fri, 22 October 2004 00:25
Read Message Re: Getting rims made for an MA61. bbaacchhyy Sun, 24 October 2004 21:55
Re: Getting rims made for an MA61. Norbie Mon, 25 October 2004 00:04
Re: Getting rims made for an MA61. bbaacchhyy Mon, 25 October 2004 00:50
Re: Getting rims made for an MA61. Norbie Mon, 25 October 2004 01:56
Read Message Re: Getting rims made for an MA61. bbaacchhyy Mon, 25 October 2004 02:01
Re: Getting rims made for an MA61. Norbie Mon, 25 October 2004 02:07
Re: Getting rims made for an MA61. joorsh Wed, 27 October 2004 13:46
Re: Getting rims made for an MA61. bbaacchhyy Wed, 27 October 2004 21:11
Read Message Re: Getting rims made for an MA61. Yian Wed, 27 October 2004 16:02
Re: Getting rims made for an MA61. joorsh Wed, 27 October 2004 23:04
Re: Getting rims made for an MA61. bbaacchhyy Wed, 27 October 2004 23:21
Re: Getting rims made for an MA61. joorsh Thu, 28 October 2004 05:31
Read Message Re: Getting rims made for an MA61. JAZE Thu, 28 October 2004 08:32
Re: Getting rims made for an MA61. joorsh Thu, 28 October 2004 08:59
Re: Getting rims made for an MA61. joorsh Sun, 07 November 2004 05:04
Re: Getting rims made for an MA61. bbaacchhyy Tue, 09 November 2004 01:52
Read Message Re: Getting rims made for an MA61. joorsh Tue, 09 November 2004 09:31
Re: Getting rims made for an MA61. bbaacchhyy Tue, 09 November 2004 10:06
Re: Getting rims made for an MA61. bbaacchhyy Thu, 23 December 2004 02:59
Re: Getting rims made for an MA61. joorsh Tue, 09 November 2004 10:18
Read Message Re: Getting rims made for an MA61. bbaacchhyy Tue, 09 November 2004 10:23
Re: Getting rims made for an MA61. joorsh Tue, 09 November 2004 10:32
Re: Getting rims made for an MA61. bbaacchhyy Tue, 09 November 2004 10:36
Re: Getting rims made for an MA61. joorsh Tue, 09 November 2004 10:43
Read Message Re: Getting rims made for an MA61. joorsh Tue, 09 November 2004 10:44
Re: Getting rims made for an MA61. bbaacchhyy Tue, 09 November 2004 10:49
Re: Getting rims made for an MA61. joorsh Tue, 09 November 2004 10:52
Re: Getting rims made for an MA61. Satoshi Tue, 09 November 2004 11:38

Previous Topic: 3SFE conversion to turbo
Next Topic: Weird noise

-=] Back to Top [=-

Current Time: Sat Jan 25 01:02:42 UTC 2025

Total time taken to generate the page: 0.0074319839477539 seconds

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.