| Author | Topic |
|---|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Getting rims made for an MA61.
|
Mon, 25 October 2004 00:50
 
|
 |
| Norbie wrote on Mon, 25 October 2004 10:04 |
| bbaacchhyy wrote on Mon, 25 October 2004 07:55 |
17x8 CSA Gladiators +6 offset - clearance to the outside of the flare on the rear guard as 43mm with no spacer at all, but with thicker Merc discs and MS123 hubs (from the bag part of the tyre - note that this gives only about 25mm clearance to the INSIDE of the flare).
|
I have 17x9 +25mm wheels for the rear end of my Supra, and I'm a bit worried about clearance on the inner edge. What are your thoughts based on the above?
|
Your rims should sit out (the outer edge of the rim) about an extra 5mm over what I have. What will make the difference is teh width of the tyre, as that is what actually will hit.
Most of the Yanks try and run 17x9 with 0 offset, but I don't know whether it hits or not.
Don't forget, that as part of the 5 stud conversion, there is an extra 2mm per side width from the thicker disc flange, and I don't know if the stub has any more/less offset than the std either.
What are you using at the front Norbs ?
Here are some pics of the front and back
|
|
|
| | Subject | Poster | Date |
|---|
 |
Getting rims made for an MA61.
|
joorsh | Wed, 20 October 2004 00:01 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Wed, 20 October 2004 00:46 |
|
Re: Getting rims made for an MA61.
|
HyDrA | Wed, 20 October 2004 00:51 |
|
Re: Getting rims made for an MA61.
|
draven | Wed, 20 October 2004 01:07 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Wed, 20 October 2004 01:37 |
|
Re: Getting rims made for an MA61.
|
BlackSupra | Wed, 20 October 2004 02:11 |
|
Re: Getting rims made for an MA61.
|
joorsh | Wed, 20 October 2004 03:11 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Wed, 20 October 2004 03:26 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Thu, 21 October 2004 02:49 |
|
Re: Getting rims made for an MA61.
|
joorsh | Thu, 21 October 2004 11:04 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Thu, 21 October 2004 21:30 |
|
Re: Getting rims made for an MA61.
|
joorsh | Fri, 22 October 2004 00:25 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Sun, 24 October 2004 21:55 |
|
Re: Getting rims made for an MA61.
|
Norbie | Mon, 25 October 2004 00:04 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Mon, 25 October 2004 00:50 |
|
Re: Getting rims made for an MA61.
|
Norbie | Mon, 25 October 2004 01:56 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Mon, 25 October 2004 02:01 |
|
Re: Getting rims made for an MA61.
|
Norbie | Mon, 25 October 2004 02:07 |
|
Re: Getting rims made for an MA61.
|
joorsh | Wed, 27 October 2004 13:46 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Wed, 27 October 2004 21:11 |
|
Re: Getting rims made for an MA61.
|
Yian | Wed, 27 October 2004 16:02 |
|
Re: Getting rims made for an MA61.
|
joorsh | Wed, 27 October 2004 23:04 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Wed, 27 October 2004 23:21 |
|
Re: Getting rims made for an MA61.
|
joorsh | Thu, 28 October 2004 05:31 |
|
Re: Getting rims made for an MA61.
|
JAZE | Thu, 28 October 2004 08:32 |
|
Re: Getting rims made for an MA61.
|
joorsh | Thu, 28 October 2004 08:59 |
|
Re: Getting rims made for an MA61.
|
joorsh | Sun, 07 November 2004 05:04 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Tue, 09 November 2004 01:52 |
|
Re: Getting rims made for an MA61.
|
joorsh | Tue, 09 November 2004 09:31 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Tue, 09 November 2004 10:06 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Thu, 23 December 2004 02:59 |
|
Re: Getting rims made for an MA61.
|
joorsh | Tue, 09 November 2004 10:18 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Tue, 09 November 2004 10:23 |
|
Re: Getting rims made for an MA61.
|
joorsh | Tue, 09 November 2004 10:32 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Tue, 09 November 2004 10:36 |
|
Re: Getting rims made for an MA61.
|
joorsh | Tue, 09 November 2004 10:43 |
|
Re: Getting rims made for an MA61.
|
joorsh | Tue, 09 November 2004 10:44 |
|
Re: Getting rims made for an MA61.
|
bbaacchhyy | Tue, 09 November 2004 10:49 |
|
Re: Getting rims made for an MA61.
|
joorsh | Tue, 09 November 2004 10:52 |
|
Re: Getting rims made for an MA61.
|
Satoshi | Tue, 09 November 2004 11:38 |
