| Author | Topic |
|---|
Club Member
Location:
Sydney, NSW
Registered:
May 2002
|
|
Re: Idling Help 4 AGE
|
Fri, 18 October 2002 13:52
 
|
 |
My 100kW also does this... Around 2500rpm at start up I imagine would be to assist with warming up the motor quicker but 1500rpm normal idle range I'm not sure about... That seems high... I think that they usually idle at around 800rpm... You may need to adjust the idle-up (???) screw to set the idle to the correct range... This is very easy to... You just need to find the screw and adjust it... You would need to have the car running at normal operating temp, turn the screw so the revs drop and check on the tacho what revs it's pulling... Then just turn the screw again, check the tacho and keep doing this until you get it at around 800rpm and that should do it... But after that, when the motor is cold, start it up and check what revs it's pulling at start-up... It may drop to around 2000rpm but should still be okay...
I'm pretty sure that a 4A-GE uses the idle adjusting screw but I'm not promising anything...
Can anyone back this up???
|
|
|
| | Subject | Poster | Date |
|---|
 |
Idling Help 4 AGE
|
Keep Rollin' | Fri, 18 October 2002 13:29 |
|
Re: Idling Help 4 AGE
|
Rolla Boy | Fri, 18 October 2002 13:52 |
|
Re: Idling Help 4 AGE
|
SW20R | Fri, 18 October 2002 14:12 |
|
Re: Idling Help 4 AGE
|
Keep Rollin' | Sat, 19 October 2002 03:23 |
|
Re: Idling Help 4 AGE
|
faulksy | Sat, 19 October 2002 17:14 |
