| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: 5MGE/7MGE
|
Sun, 20 October 2002 02:21
 
|
 |
| RollaLevin wrote on Sun, 20 October 2002 02:30 |
Gianttomato, are you sure that the piston-valve clearance will be a problem? I would have thought that the 5mg would run more lift than a 7mg look at the size of those cam towers! Also, what would you estimate the CR to be using OEM 5mg pistons? the 5mg has fuck-all compression standard.
|
RollaLevin, I'm almost 100% certain - I haven't done it but knowing what both pistons look like, I would imagine the valves will hit the 5MG piston. The cam towers on the 5/6MG are just one way of storing the cams and hydraulic mechanism to open the valves. The 7MGE works by direct cam to bucket activation, hence no need for huge towers. Can't comment on the 5M lift, but 7M would have around 7.5 - 8 (or so) mm.
Standard 7MGE CR is 9.2:1 and that's with a piston that is DISHED. Put in a piston that is DOMED and you'll send the CR thru the roof!
|
|
|
| | Subject | Poster | Date |
|---|
 |
5MGE/7MGE
|
hydro | Thu, 17 October 2002 09:21 |
|
Re: 5MGE/7MGE
|
rob_RA40 | Thu, 17 October 2002 09:28 |
|
Re: 5MGE/7MGE
|
Thermactor | Wed, 06 November 2002 06:10 |
|
Re: 5MGE/7MGE
|
gianttomato | Wed, 06 November 2002 06:20 |
|
Re: 5MGE/7MGE
|
Norbie | Thu, 17 October 2002 11:14 |
|
Re: 5MGE/7MGE
|
gianttomato | Fri, 18 October 2002 03:41 |
|
Re: 5MGE/7MGE
|
hydro | Fri, 18 October 2002 08:34 |
|
Re: 5MGE/7MGE
|
gianttomato | Fri, 18 October 2002 09:07 |
|
Re: 5MGE/7MGE
|
ed_ma61 | Fri, 18 October 2002 14:34 |
|
Re: 5MGE/7MGE
|
hydro | Fri, 18 October 2002 22:15 |
|
Re: 5MGE/7MGE
|
rob_RA40 | Fri, 18 October 2002 23:41 |
|
Re: 5MGE/7MGE
|
gianttomato | Sat, 19 October 2002 08:14 |
|
Re: 5MGE/7MGE
|
RollaLevin | Sat, 19 October 2002 16:30 |
|
Re: 5MGE/7MGE
|
gianttomato | Sun, 20 October 2002 02:21 |
|
Re: 5MGE/7MGE
|
ed_ma61 | Sun, 20 October 2002 12:28 |
|
Re: 5MGE/7MGE
|
ed_ma61 | Sun, 20 October 2002 12:22 |
|
Re: 5MGE/7MGE
|
RollaLevin | Mon, 21 October 2002 14:39 |
|
Re: 5MGE/7MGE
|
gianttomato | Fri, 25 October 2002 00:08 |
|
Re: 5MGE/7MGE
|
Norbie | Fri, 25 October 2002 03:20 |
|
Re: 5MGE/7MGE
|
hydro | Tue, 05 November 2002 09:08 |
|
Re: 5MGE/7MGE
|
ed_ma61 | Wed, 06 November 2002 06:36 |
