F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » MX73 Cressida mods Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
CrUZsida Forums Junkie I supported Toymods Location: Australia Registered: November 2003	Re: MX73 Cressida mods Mon, 01 November 2004 07:37 Not many ppl do up the MX73 Putting a 1uz/1jz into the MX83 is getting very popular. The wiring is very simple if you can read a diagram (and if you can get one!) Its easier to wire up the factory ecu than an aftermarket one, providing you have everything. People go aftermarket when they plan to modify the engine past stock specs. There is only so much boost a stock ecu can control the fuel for. 7mgte is good, and a very simple swap. Be prepared for another $500-$1000 repair when the headgasket blows. Aftermarket gear ranges from Wolf3d, Microtech, Haltech, Autronic, and MoTeC, depending on how much you want to spend That was typed in cheapest to most expensive. [Report message to a moderator]

	Subject	Poster	Date
	MX73 Cressida mods	TrevofKal	Mon, 01 November 2004 05:14
	Re: MX73 Cressida mods	matt_84	Mon, 01 November 2004 05:17
	Re: MX73 Cressida mods	CrUZsida	Mon, 01 November 2004 05:23
	Re: MX73 Cressida mods	TrevofKal	Mon, 01 November 2004 06:55
	Re: MX73 Cressida mods	CrUZsida	Mon, 01 November 2004 07:00
	Re: MX73 Cressida mods	TrevofKal	Mon, 01 November 2004 07:12
	Re: MX73 Cressida mods	CrUZsida	Mon, 01 November 2004 07:16
	Re: MX73 Cressida mods	TrevofKal	Mon, 01 November 2004 07:31
	Re: MX73 Cressida mods	CrUZsida	Mon, 01 November 2004 07:37

Previous Topic:	Serpentine Belt Tensioners
Next Topic:	1g alternator wiring + wiring testing

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.