Location: Toronto, Downtown
Registered: September 2004
Re: Can't find Coiloversor camber adjustment plates for aw11s
Wed, 03 November 2004 21:24
feral4mr2 wrote on Thu, 04 November 2004 00:51
4agte wrote on Wed, 03 November 2004 23:20
Oh and does anyone know if the standard aw11 supercharged suspension has adjustable shocks cause the ones from my half cut do and the guy from SSS said they were standard. They feel a bit too stiff to be standard.
this could be open to debate.
i got a set of rear strut assemblies from a s/c half cut in Perth, they had adjustable shocks (4 way dampning) and different springs. after pulling them from the strut housing they had KYB and TRD stamped on them.
the 1988 s/c half cut i got from SSS in early 1999 has factory toyota non-adjustable normal shocks in it.
go figure..
I think the springs are lower than normal and mine are 4 way adjustable aswell so i wouldnt be suprised if they were kyb with trd.
Wed, 03 November 2004 21:24
