F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Installing Celicamad Boost Controller Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
celicamad Forums Junkie Location: newcastle Registered: June 2002	Re: Installing Celicamad Boost Controller Wed, 03 November 2004 23:18 Thanks Frank Yes it works equally as well on 1ggte . All you need to do is replace the wastgate t piece with the controller and then plumb one or both compressor hoses into the inlet side . It will take about 5 mins to install and 20 mins to tune . But a full bolt on kit for both 1ggte and 1jzgte will be available soon TRICKS for all boost controllers 1. keep hoses as short as possible.But still keeping contoller AWAY from direct heat ..eg exhaust turbos etc 2. use 6mm id (any bigger they spike any smaller boost is hard to controll).Use hard rubber or thick walled silicon hose (silicon is best).Other hoses swell causing spikes . 3. always tune a controller at normal operating temperature . dont take it out dead cold or flog in stupid during setup . after setup is just about spot on take it for a big long cooling run then test final setup . [Report message to a moderator]

	Subject	Poster	Date
	Installing Celicamad Boost Controller	woofa347	Tue, 02 November 2004 10:11
	Re: Installing Celicamad Boost Controller	Grant	Tue, 02 November 2004 11:01
	Re: Installing Celicamad Boost Controller	YelloRolla	Tue, 02 November 2004 11:09
	Re: Installing Celicamad Boost Controller	woofa347	Tue, 02 November 2004 11:13
	Re: Installing Celicamad Boost Controller	woofa347	Tue, 02 November 2004 11:16
	Re: Installing Celicamad Boost Controller	YelloRolla	Tue, 02 November 2004 11:19
	Re: Installing Celicamad Boost Controller	woofa347	Tue, 02 November 2004 11:38
	Re: Installing Celicamad Boost Controller	woofa347	Tue, 02 November 2004 12:10
	Re: Installing Celicamad Boost Controller	Chris Davey	Tue, 02 November 2004 12:44
	Re: Installing Celicamad Boost Controller	woofa347	Tue, 02 November 2004 13:33
	Re: Installing Celicamad Boost Controller	Chris Davey	Tue, 02 November 2004 13:37
	Re: Installing Celicamad Boost Controller	woofa347	Tue, 02 November 2004 14:17
	Re: Installing Celicamad Boost Controller	woofa347	Tue, 02 November 2004 14:22
	Re: Installing Celicamad Boost Controller	Chris Davey	Tue, 02 November 2004 14:39
	Re: Installing Celicamad Boost Controller	celicamad	Wed, 03 November 2004 05:34
	Re: Installing Celicamad Boost Controller	woofa347	Wed, 03 November 2004 05:57
	Re: Installing Celicamad Boost Controller	celicamad	Wed, 03 November 2004 08:14
	Re: Installing Celicamad Boost Controller	CrUZsida	Wed, 03 November 2004 08:18
	Re: Installing Celicamad Boost Controller	Snyper	Wed, 03 November 2004 10:20
	Re: Installing Celicamad Boost Controller	justcallmefrank	Wed, 03 November 2004 10:21
	Re: Installing Celicamad Boost Controller	celicamad	Wed, 03 November 2004 23:18
	Re: Installing Celicamad Boost Controller	Snyper	Thu, 04 November 2004 09:39
	Re: Installing Celicamad Boost Controller	celicamad	Thu, 04 November 2004 11:07
	Re: Installing Celicamad Boost Controller	BLK1GGTE	Fri, 05 November 2004 02:29
	Re: Installing Celicamad Boost Controller	celicamad	Fri, 05 November 2004 10:11
	Re: Installing Celicamad Boost Controller	Special Ed	Mon, 08 November 2004 06:21

Previous Topic:	1g-gte onto ra28, whats the deal?
Next Topic:	Exhausts on 4ages

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.