| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: 1UZFE engine dimensions ?
|
Thu, 04 November 2004 06:40
 
|
 |
|
As you have possibly gathered from some of the responses, converting to IRS isn't for the faint hearted. If you are going to all that trouble, at least start with a better setup than a trailing arm MA61/*T142 rear end. At least go for a double wishbone setup like an MA70/JZA80/JZZ30. Whole rear cuts can be had for $4-500, and the whole lot is mounted to a subassembly which (with significant modification) could be more easily adapted to a Mk2 than the trailing arm setups. You better be pretty handy with a welder.
|
|
|
| | Subject | Poster | Date |
|---|
 |
1UZFE engine dimensions ?
|
soo33y | Sun, 24 October 2004 07:39 |
|
Re: 1UZFE engine dimensions ?
|
Norbie | Sun, 24 October 2004 23:40 |
|
Re: 1UZFE engine dimensions ?
|
joecoolmk2 | Mon, 25 October 2004 00:31 |
|
Re: 1UZFE engine dimensions ?
|
justcallmefrank | Mon, 25 October 2004 01:05 |
|
Re: 1UZFE engine dimensions ?
|
Norbie | Mon, 25 October 2004 01:53 |
|
Re: 1UZFE engine dimensions ?
|
joecoolmk2 | Mon, 25 October 2004 02:07 |
|
Re: 1UZFE engine dimensions ?
|
gianttomato | Mon, 25 October 2004 03:34 |
|
Re: 1UZFE engine dimensions ?
|
joecoolmk2 | Thu, 28 October 2004 00:37 |
|
Re: 1UZFE engine dimensions ?
|
gianttomato | Thu, 28 October 2004 02:09 |
|
Re: 1UZFE engine dimensions ?
|
Norbie | Thu, 28 October 2004 01:06 |
|
Re: 1UZFE engine dimensions ?
|
joecoolmk2 | Thu, 28 October 2004 01:13 |
|
Re: 1UZFE engine dimensions ?
|
joecoolmk2 | Thu, 04 November 2004 00:52 |
|
Re: 1UZFE engine dimensions ?
|
gianttomato | Thu, 04 November 2004 01:19 |
|
Re: 1UZFE engine dimensions ?
|
rob_RA40 | Thu, 04 November 2004 01:15 |
|
Re: 1UZFE engine dimensions ?
|
joecoolmk2 | Thu, 04 November 2004 01:28 |
|
Re: 1UZFE engine dimensions ?
|
Norbie | Thu, 04 November 2004 03:37 |
|
Re: 1UZFE engine dimensions ?
|
rob_RA40 | Thu, 04 November 2004 02:02 |
|
Re: 1UZFE engine dimensions ?
|
joecoolmk2 | Thu, 04 November 2004 03:34 |
|
Re: 1UZFE engine dimensions ?
|
joecoolmk2 | Thu, 04 November 2004 03:41 |
|
Re: 1UZFE engine dimensions ?
|
CrUZsida | Thu, 04 November 2004 03:43 |
|
Re: 1UZFE engine dimensions ?
|
rob_RA40 | Thu, 04 November 2004 04:52 |
|
Re: 1UZFE engine dimensions ?
|
CrUZsida | Thu, 04 November 2004 04:54 |
|
Re: 1UZFE engine dimensions ?
|
rob_RA40 | Thu, 04 November 2004 04:54 |
|
Re: 1UZFE engine dimensions ?
|
EvilJack | Thu, 04 November 2004 05:07 |
|
Re: 1UZFE engine dimensions ?
|
gianttomato | Thu, 04 November 2004 06:40 |
|
Re: 1UZFE engine dimensions ?
|
TA-022 | Thu, 04 November 2004 07:39 |
|
Re: 1UZFE engine dimensions ?
|
bbaacchhyy | Fri, 05 November 2004 02:28 |
|
Re: 1UZFE engine dimensions ?
|
joecoolmk2 | Fri, 05 November 2004 01:52 |
|
Re: 1UZFE engine dimensions ?
|
Norbie | Fri, 05 November 2004 11:54 |
|
Re: 1UZFE engine dimensions ?
|
R-jay | Sat, 06 November 2004 00:45 |
|
Re: 1UZFE engine dimensions ?
|
gianttomato | Sat, 06 November 2004 06:14 |
