| Author | Topic |
|---|
Location:
Syndey
Registered:
December 2002
|
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
Fri, 05 November 2004 02:27
 
|
 |
.8mm will be fine for anything up to about 18psi then you may need to bring it down to .7 or .65 depending on the ign system you have, when gapping below .8 you may exprience some slight idle misses.
|
|
|
| | Subject | Poster | Date |
|---|
 |
1ggte iradum vs platinum adn plug gap when increasing boost
|
BLK1GGTE | Thu, 04 November 2004 18:56 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
Dirty_Sanchez | Thu, 04 November 2004 23:28 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
BLK1GGTE | Fri, 05 November 2004 02:18 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
MR 1JZ | Fri, 05 November 2004 02:24 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
10sec_rx7 | Fri, 05 November 2004 02:27 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
stradlater | Fri, 05 November 2004 02:35 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
10sec_rx7 | Fri, 05 November 2004 02:38 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
Green_s13 | Fri, 05 November 2004 08:34 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
TA22-3SGTE | Fri, 05 November 2004 11:07 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
10sec_rx7 | Sat, 06 November 2004 02:19 |
|
Re: 1ggte iradum vs platinum adn plug gap when increasing boost
|
ddeane | Sat, 06 November 2004 04:10 |
