Location: Newcastle, Hunter Valley
Registered: January 2004
Re: ke70 cable clutch installation?
Fri, 05 November 2004 10:30
thats what i was gonna send you, look harder on page 73.
to install basically all you have to do is:
1.slip the clutch end of the cable through the bellhousing (the hole that lines up with the release lever)
2.bolt the cable support on
3.Put the "E" clip on ( before the bellhousing, engine side)
4.slide thogh firewall
5.Slip over clutch pedal ( notch on the top of it)
6.Place the second "E" clip in
PS. On the gearbox end of the cable, there is a removable part, the "clevis", that is most probably the part that is missing as it just slips off the end of the cable
Fri, 05 November 2004 10:30
