F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1ggte iradum vs platinum adn plug gap when increasing boost Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
TA22-3SGTE Regular Location: MACKAY Registered: May 2002	Re: 1ggte iradum vs platinum adn plug gap when increasing boost Fri, 05 November 2004 11:07 If you are going to run any more boost than standard then chuck the iridiums or platinums in the bin and put a set of Denso K20PR-U plugs in , they cost about $3.50 each and produce a much better spark then the others ,I use the Denso plugs in my 3SGTE and have run over 35 lbs boost without problems , I gap them at .030" . Trevor [Report message to a moderator]

	Subject	Poster	Date
	1ggte iradum vs platinum adn plug gap when increasing boost	BLK1GGTE	Thu, 04 November 2004 18:56
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	Dirty_Sanchez	Thu, 04 November 2004 23:28
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	BLK1GGTE	Fri, 05 November 2004 02:18
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	MR 1JZ	Fri, 05 November 2004 02:24
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	10sec_rx7	Fri, 05 November 2004 02:27
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	stradlater	Fri, 05 November 2004 02:35
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	10sec_rx7	Fri, 05 November 2004 02:38
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	Green_s13	Fri, 05 November 2004 08:34
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	TA22-3SGTE	Fri, 05 November 2004 11:07
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	10sec_rx7	Sat, 06 November 2004 02:19
	Re: 1ggte iradum vs platinum adn plug gap when increasing boost	ddeane	Sat, 06 November 2004 04:10

Previous Topic:	ke70 cable clutch installation?
Next Topic:	Injector Resistance settings

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.