F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1g-gte onto ra28, whats the deal? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ra23celica Forums Junkie Registered: November 2002	Re: 1g-gte onto ra28, whats the deal? Mon, 08 November 2004 05:47 You have got the TA23 crossmember confused with the RA23 one, same as the RA28 as mentioned above. TA23 X-mems are used when you fit a 1G-GE or a 2/3T series motor to your RA28. Use the mid-rear sump however you will have to shorten the back of it with a cut and shut to clear the steering arm. Not quite a 'custom' g/box crossmember but two 3mm plates welded to the top of it and a pair of new holes drilled in the forward section and the previous forward holes drilled through the plate. Shortened Hilux diff will have either a F or G series flange plate and that is not compatible with the T series driveshaft. Change flange plates or shorten a Hilux driveshaft to suit. [Report message to a moderator]

	Subject	Poster	Date
	1g-gte onto ra28, whats the deal?	jcmunga	Sat, 06 November 2004 02:55
	Re: 1g-gte onto ra28, whats the deal?	EvilJack	Sat, 06 November 2004 03:05
	Re: 1g-gte onto ra28, whats the deal?	M.W.P.	Sat, 06 November 2004 03:37
	Re: 1g-gte onto ra28, whats the deal?	EnFlaMEd	Sun, 07 November 2004 05:43
	Re: 1g-gte onto ra28, whats the deal?	jcmunga	Sun, 07 November 2004 11:21
	Re: 1g-gte onto ra28, whats the deal?	MR 1JZ	Mon, 08 November 2004 01:26
	Re: 1g-gte onto ra28, whats the deal?	M.W.P.	Mon, 08 November 2004 04:55
	Re: 1g-gte onto ra28, whats the deal?	ra23celica	Mon, 08 November 2004 05:47
	Re: 1g-gte onto ra28, whats the deal?	MR 1JZ	Mon, 08 November 2004 07:16

Previous Topic:	reuseing a head gasket???
Next Topic:	Installing Celicamad Boost Controller

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.