Toymods Car Club Inc: Tech & Conversions => water injection.

Toymods Car Club
www.toymods.org.au

F.A.Q.

Toymods » Tech & Conversions » water injection. Show: Today's Posts :: Show Polls Email to friend

Author

Topic

84supra
Regular

Location:
myrrhee
Registered:
March 2004

Re: water injection.	Fri, 12 November 2004 04:29

It dosn't really matter were you inject the water. I would plumb it in before the turbo as it is easier than pushing against your boost pressure. If you do this you could use a pressurized bottle system where the engine boost pushes on top of the water making the water only come on during boost. I would use a nitrous oxide 'dry' injector for the water and an LPG fuel solenoid to allow the system to work only above say 25 degrees inlet temp. The nitrous injectors are jetted so you could tune it easily. I hope this helps mate. [Report message to a moderator]

Send a private message to this user

[Message index]

Subject Poster Date

Read Message water injection. MR. 2 Fri, 12 November 2004 03:45
Re: water injection. 84supra Fri, 12 November 2004 04:29
Re: water injection. M.W.P. Fri, 12 November 2004 04:34
Re: water injection. Joshstix Fri, 12 November 2004 04:48
Re: water injection. 84supra Fri, 12 November 2004 05:16
Read Message Re: water injection. buccy Fri, 12 November 2004 05:46
Re: water injection. MR. 2 Fri, 12 November 2004 05:48
Re: water injection. feral4mr2 Fri, 12 November 2004 08:46
Re: water injection. Anthony55 Fri, 12 November 2004 11:02
Re: water injection. thechuckster Fri, 12 November 2004 12:42
Read Message Re: water injection. M.W.P. Sat, 13 November 2004 06:22
Re: water injection. Classique71 Sun, 14 November 2004 00:09
Re: water injection. cplux Fri, 12 November 2004 10:04
Re: water injection. NVD05X Fri, 12 November 2004 10:16
Re: water injection. MR. 2 Sun, 14 November 2004 00:54
Read Message Re: water injection. Classique71 Sun, 14 November 2004 08:24
Re: water injection. SevPP Mon, 20 June 2005 07:22
Re: water injection. badboybubby Tue, 21 June 2005 07:33

Previous Topic: 4age (4 to 1) Vs (4 to 2 to 1) extractors
Next Topic: 1g-gte rebuild bits

-=] Back to Top [=-

Current Time: Sat Aug 2 15:58:12 UTC 2025

Total time taken to generate the page: 0.0055928230285645 seconds

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.