Author | Topic |
Location: Eastern Sydney
Registered: May 2002
|
Re: eliminating body roll - ra28
|
Thu, 30 May 2002 07:28
|
|
TurboRA28 wrote on Thu, 30 May 2002 10:54 AM | Sorry for the dumb question but what exactly is roll center?
|
Roll centre is the theoretical point in the chassis where the weight pivots from when you apply a side load (i.e. turn into a corner). the closer you can get your roll centre to the centre of gravity, the less tendency the car will have to rolling,as you shorten this pivot's length.
roll centre adjusters are necessary with some live axle cars (e.g older toyotas)when they are lowered. this is because the rear roll centre is most commonly the centre of the diff housing,which doesn't alter when you lower the car. unfortunately,the front RC does move,and you end up with a low front RC,and a high rear RC,which isn't the best-the car will tend to roll over itself-pivot from the rear axle before the front.
roll centre adjusters bolted to the base of macpherson struts lift the front roll centre,fixing it's relationship with the rear,as well as bringing the RC and the CoG closer together. the result is greater overall stability,and less body roll,but without the downsides that very large swaybars give for the same roll reduction. the only downsides are a small increase in tramlining,and a shift in camber to positive by about half a degree.
Justin...
[Updated on: Thu, 30 May 2002 07:31]
|
|
|
| Subject | Poster | Date |
|
eliminating body roll - ra28
|
TurboRA28 | Mon, 27 May 2002 01:15 |
|
Re: eliminating body roll - ra28
|
Les | Mon, 27 May 2002 02:30 |
|
Re: eliminating body roll - ra28
|
Soarer | Mon, 27 May 2002 06:52 |
|
Re: eliminating body roll - ra28
|
TurboRA28 | Mon, 27 May 2002 06:57 |
|
Re: eliminating body roll - ra28
|
TOY77 | Mon, 27 May 2002 08:31 |
|
Re: eliminating body roll - ra28
|
Celica RA45 | Mon, 27 May 2002 11:04 |
|
Re: eliminating body roll - ra28
|
Celica RA45 | Mon, 27 May 2002 11:06 |
|
Re: eliminating body roll - ra28
|
Jonny2TG | Mon, 27 May 2002 13:59 |
|
Re: eliminating body roll - ra28
|
TurboRA28 | Tue, 28 May 2002 04:44 |
|
Re: eliminating body roll - ra28
|
fergo308 | Tue, 28 May 2002 08:36 |
|
Re: eliminating body roll - ra28
|
Jonny2TG | Wed, 29 May 2002 03:37 |
|
Re: eliminating body roll - ra28
|
fergo308 | Wed, 29 May 2002 09:18 |
|
Re: eliminating body roll - ra28
|
Jonny2TG | Wed, 29 May 2002 15:16 |
|
Re: eliminating body roll - ra28
|
TurboRA28 | Thu, 30 May 2002 00:54 |
|
Re: eliminating body roll - ra28
|
fergo308 | Thu, 30 May 2002 07:28 |
|
Re: eliminating body roll - ra28
|
Malkomv2.0 | Thu, 30 May 2002 07:38 |
|
Re: eliminating body roll - ra28
|
Bugman | Thu, 30 May 2002 07:08 |
|
Re: eliminating body roll - ra28
|
TurboRA28 | Thu, 30 May 2002 07:13 |
|
Re: eliminating body roll - ra28
|
TurboRA28 | Thu, 30 May 2002 07:57 |
|
Re: eliminating body roll - ra28
|
fergo308 | Thu, 30 May 2002 13:05 |
|
Re: eliminating body roll - ra28
|
fade-e | Tue, 08 February 2005 19:22 |
|
Re: eliminating body roll - ra28
|
Celica_John | Tue, 08 February 2005 20:50 |
|
Re: eliminating body roll - ra28
|
TurboRA28 | Tue, 08 February 2005 23:10 |
|
Re: eliminating body roll - ra28
|
TurboRA28 | Wed, 09 February 2005 00:21 |
|
Re: eliminating body roll - ra28
|
gold28 | Wed, 09 February 2005 00:53 |
|
Re: eliminating body roll - ra28
|
Stefan | Wed, 09 February 2005 03:06 |
|
Re: eliminating body roll - ra28
|
fade-e | Wed, 09 February 2005 04:47 |
|
Re: eliminating body roll - ra28
|
BlackMR2 | Wed, 09 February 2005 06:34 |
|
Re: eliminating body roll - ra28
|
Celica_John | Wed, 09 February 2005 06:53 |
|
Re: eliminating body roll - ra28
|
jesseT18 | Wed, 09 February 2005 08:30 |
|
Re: eliminating body roll - ra28
|
Stefan | Wed, 09 February 2005 12:03 |
|
Re: eliminating body roll - ra28
|
fade-e | Wed, 09 February 2005 12:04 |
Current Time:
Fri Jan 31 19:59:28 UTC 2025 |
Total time taken to generate the page: 0.0056278705596924 seconds |