Author | Topic |
Location: Epping, Sydney
Registered: April 2003
|
Re: driveshaft hub nut HOW?
|
Mon, 15 November 2004 07:56
|
|
I had a thick crowbar through my wheel studs onto the ground at the angle that would give the least flex through the bar.
then I got a big breaker and put a pole on the end (after lots of wd40)
mind you, I bent my first breaker, so be careful. I went out and got a fatter one.
They are done up super super super hard
Hammering it once you have pressure on the bar to break the 'lock' can help sometimes too
also, make sure you have a deep enough socket on it
ps, my rattle gun I had wouldn't take it off either
|
|
|
| Subject | Poster | Date |
|
driveshaft hub nut HOW?
|
Blockman02 | Mon, 15 November 2004 07:15 |
|
Re: driveshaft hub nut HOW?
|
Mr DOHC | Mon, 15 November 2004 07:31 |
|
Re: driveshaft hub nut HOW?
|
RobST162 | Mon, 15 November 2004 07:56 |
|
Re: driveshaft hub nut HOW?
|
FWDCelica | Mon, 15 November 2004 08:19 |
|
Re: driveshaft hub nut HOW?
|
HighRolla | Mon, 15 November 2004 09:25 |
|
Re: driveshaft hub nut HOW?
|
RA28 | Mon, 15 November 2004 12:11 |
|
Re: driveshaft hub nut HOW?
|
takai | Mon, 15 November 2004 10:43 |
|
Re: driveshaft hub nut HOW?
|
mrshin | Mon, 15 November 2004 11:28 |
|
Re: driveshaft hub nut HOW?
|
takai | Mon, 15 November 2004 11:31 |
|
Re: driveshaft hub nut HOW?
|
mrshin | Mon, 15 November 2004 11:41 |
|
Re: driveshaft hub nut HOW?
|
takai | Mon, 15 November 2004 11:50 |
|
Re: driveshaft hub nut HOW?
|
HighRolla | Mon, 15 November 2004 12:01 |
|
Re: driveshaft hub nut HOW?
|
wagonist | Tue, 16 November 2004 01:23 |
|
Re: driveshaft hub nut HOW?
|
tooch | Tue, 16 November 2004 08:03 |
|
Re: driveshaft hub nut HOW?
|
Farmsci ST162 | Tue, 16 November 2004 09:25 |
|
Re: driveshaft hub nut HOW?
|
rsdeo | Thu, 18 November 2004 00:26 |
|
Re: driveshaft hub nut HOW?
|
EvilJack | Thu, 18 November 2004 00:37 |
|
Re: driveshaft hub nut HOW?
|
HyDrA | Thu, 18 November 2004 03:09 |