F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » I/C piping for MA61's with 7M-GTE engines Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
bbaacchhyy Forums Junkie Location: Adelaide Registered: September 2003	Re: I/C piping for MA61's with 7M-GTE engines Tue, 16 November 2004 04:28 justcallmefrank wrote on Tue, 16 November 2004 15:16 Ok, failing running it through those holes, is there enough room to run it under that into the bay and up through the stone guard or would that be too low? I'm not near my car to check. Reason being every 7M setup I've seen mimicking the factory setup has an enormous amount of IC piping, especially when using an IC with the outlets at opposing ends. Couldn't agree more Nathan, but with the 7M, you are stuck sometimes. I was going to look at one of the available HKS MA70 upgrade ones, but it will amots take as much piping and have a shitty lower entry similar to the current one. If you look at the pics of the Rabid Chimp setup (link is in the first post), I'll be using the same I/C pipe/tank arrangement, but use a similar path that my current upper pipe pakes (a little shorter). The core that I am using is 480 wide x 380 high (20mm wider and 75mm taller than RC's). I'd love to go with a FF manifold, but I really am after only about 260 kW, although the piping is longer (and bigger volume with 2.5") it is a compromise that I'm willing to make. I may not be able to follow the path that CruZida takes with his upper pipe, as it may interefere with the path of the lower pipe and the oil cooler thermostat. ANy more pics would be appreciated so that I can come up with the best of both worlds Cheers Michael B [Report message to a moderator]

	Subject	Poster	Date
	I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Mon, 15 November 2004 04:51
	Re: I/C piping for MA61's with 7M-GTE engines	Norbie	Mon, 15 November 2004 04:54
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Mon, 15 November 2004 04:59
	Re: I/C piping for MA61's with 7M-GTE engines	oldcorollas	Mon, 15 November 2004 05:03
	Re: I/C piping for MA61's with 7M-GTE engines	RA65 Sleeka	Mon, 15 November 2004 04:55
	Re: I/C piping for MA61's with 7M-GTE engines	Danners	Mon, 15 November 2004 05:09
	Re: I/C piping for MA61's with 7M-GTE engines	justcallmefrank	Mon, 15 November 2004 05:09
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Mon, 15 November 2004 05:18
	Re: I/C piping for MA61's with 7M-GTE engines	BlackSupra	Mon, 15 November 2004 12:20
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 00:22
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Tue, 16 November 2004 00:27
	Re: I/C piping for MA61's with 7M-GTE engines	justcallmefrank	Tue, 16 November 2004 00:44
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 03:35
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Tue, 16 November 2004 03:39
	Re: I/C piping for MA61's with 7M-GTE engines	HyDrA	Tue, 16 November 2004 04:07
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 04:13
	Re: I/C piping for MA61's with 7M-GTE engines	justcallmefrank	Tue, 16 November 2004 04:16
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 04:28
	Re: I/C piping for MA61's with 7M-GTE engines	justcallmefrank	Tue, 16 November 2004 04:32
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 04:38
	Re: I/C piping for MA61's with 7M-GTE engines	justcallmefrank	Tue, 16 November 2004 04:43
	Re: I/C piping for MA61's with 7M-GTE engines	Norbie	Tue, 16 November 2004 04:48
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 04:53
	Re: I/C piping for MA61's with 7M-GTE engines	Norbie	Tue, 16 November 2004 06:18
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 06:24
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Tue, 16 November 2004 06:28
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 06:56
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Tue, 16 November 2004 07:00
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 07:04
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Tue, 16 November 2004 07:08
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 07:12
	Re: I/C piping for MA61's with 7M-GTE engines	justcallmefrank	Tue, 16 November 2004 04:56
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Tue, 16 November 2004 05:04
	Re: I/C piping for MA61's with 7M-GTE engines	justcallmefrank	Tue, 16 November 2004 05:21
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Tue, 16 November 2004 07:17
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Tue, 16 November 2004 14:19
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Wed, 17 November 2004 03:18
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Wed, 17 November 2004 03:21
	Re: I/C piping for MA61's with 7M-GTE engines	bbaacchhyy	Mon, 22 November 2004 10:19
	Re: I/C piping for MA61's with 7M-GTE engines	CrUZsida	Mon, 22 November 2004 13:42

Previous Topic:	MA61 Digidash dodgy speedo
Next Topic:	turbo or supercharging a 5k

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.