Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » ke11 brake upgrade+ stud conversion

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
earlyrolla
Regular


Location:
Perth
Registered:
May 2003
Re: ke11 brake upgrade+ stud conversion Mon, 22 November 2004 12:35 Go to previous messageGo to previous message
The outer bearings are the same. The inner bearings have the same external taper but different internal diameter. Hence you can use the existing cone in the hub and simply use the KE11 bearing.

I think the dust seal is also different. In addition I think the KE11 dust seal has a smaller external diameter too so it cant simply be pushed into the later hub. But I could be wrong on this as it is while since I looked.

In regards to the master cylinder, using one of the KE70 would be the best option as it matches the front brakes (possibly the back if you decide to upgrade them too). If this car is to be fully road complient then it would be best to talk to an engineer on this.

The stud pattern can be easily changed by any competent machine shop, but whether the cost of the mod is worth it on a standard KE11 diff is another question.

Not sure if later Corolla axles will fit. I know the KE1x has a very narrow rear-end, so I doubt it.

As for other diffs, depends on the torque you plan to put through it to how big it needs to be. A Hilux diff in a KE11 would be an overkill unless you have a high torque engine with a seriously savage clutch.

What sort of engine have you got planned?

[Updated on: Mon, 22 November 2004 12:37]

  Send a private message to this user    

SubjectPosterDate
Read Message   ke11 brake upgrade+ stud conversion syncroMon, 22 November 2004 09:07
Read Message   Re: ke11 brake upgrade+ stud conversion  earlyrollaMon, 22 November 2004 12:35
Read Message   Re: ke11 brake upgrade+ stud conversion syncroTue, 23 November 2004 07:57
Read Message   Re: ke11 brake upgrade+ stud conversion BradWTue, 23 November 2004 10:32
Read Message   Re: ke11 brake upgrade+ stud conversion syncroFri, 26 November 2004 07:49
Read Message   Re: ke11 brake upgrade+ stud conversion earlyrollaFri, 26 November 2004 12:12
Read Message   Re: ke11 brake upgrade+ stud conversion syncroSat, 27 November 2004 04:53
Read Message   Re: ke11 brake upgrade+ stud conversion V8_MA61Sat, 27 November 2004 06:17
Read Message   Re: ke11 brake upgrade+ stud conversion earlyrollaTue, 30 November 2004 00:53
Read Message   Re: ke11 brake upgrade+ stud conversion syncroTue, 30 November 2004 08:21
Read Message   Re: ke11 brake upgrade+ stud conversion earlyrollaTue, 30 November 2004 14:30
Read Message   Re: ke11 brake upgrade+ stud conversion syncroWed, 01 December 2004 08:23
Read Message   Re: ke11 brake upgrade+ stud conversion lexanWed, 22 December 2004 11:53
Read Message   Re: ke11 brake upgrade+ stud conversion syncroFri, 24 December 2004 04:43
Previous Topic:Hilux Rear Disk Brakes
Next Topic:Lite ace diff strength??

Goto Forum:
-=] Back to Top [=-

Current Time: Fri Jan 10 11:53:40 UTC 2025

Total time taken to generate the page: 0.0065510272979736 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.