F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1G-GTE Camshafts... Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Looonie Regular Location: Auckland, NZ Registered: April 2004	Re: 1G-GTE Camshafts... Wed, 24 November 2004 03:29 HyDrA wrote on Wed, 24 November 2004 15:17 Loonie, is that your setup? How much did the parts cost for that boost controller? That is indeed my setup, photos taken about a minute and a half before I posted From memory it cost me around $200-$250 for all the parts... thats bleed valve, needle valve, 2 brass hose nipples, 4 or 5 brass t joins, couple of metres of fuel hose, hose clamps... the expensive parts were the two valves... I was surprised how much it cost in the end, but then I suppose if you buy any "name brand" bleed valve thats usually $200 on its own then you need all the hoses and stuff to join the two wastegates anyway... I'm gonna have to look into the TVIS setup more closely because that does sound like it could very likely be the cause of no low down torque and the turbos taking so long to spool... unfortunately its gonna get messy once I start pulling the intake off :\ Do the butterflies for the runners sit at the top of the runners or the bottom? Hopefully I can just pull the plenum off the runners and check from there... rather than taking the runners off the head... [Report message to a moderator]

	Subject	Poster	Date
	1G-GTE Camshafts...	Looonie	Tue, 23 November 2004 21:58
	Re: 1G-GTE Camshafts...	justcallmefrank	Wed, 24 November 2004 00:40
	Re: 1G-GTE Camshafts...	HyDrA	Wed, 24 November 2004 01:03
	Re: 1G-GTE Camshafts...	justcallmefrank	Wed, 24 November 2004 01:05
	Re: 1G-GTE Camshafts...	Looonie	Wed, 24 November 2004 01:09
	Re: 1G-GTE Camshafts...	justcallmefrank	Wed, 24 November 2004 01:15
	Re: 1G-GTE Camshafts...	HyDrA	Wed, 24 November 2004 01:17
	Re: 1G-GTE Camshafts...	justcallmefrank	Wed, 24 November 2004 01:19
	Re: 1G-GTE Camshafts...	HyDrA	Wed, 24 November 2004 01:22
	Re: 1G-GTE Camshafts...	justcallmefrank	Wed, 24 November 2004 01:41
	Re: 1G-GTE Camshafts...	indian	Wed, 24 November 2004 01:48
	Re: 1G-GTE Camshafts...	Looonie	Wed, 24 November 2004 01:54
	Re: 1G-GTE Camshafts...	thechuckster	Wed, 24 November 2004 02:02
	Re: 1G-GTE Camshafts...	Looonie	Wed, 24 November 2004 01:43
	Re: 1G-GTE Camshafts...	HyDrA	Wed, 24 November 2004 01:44
	Re: 1G-GTE Camshafts...	justcallmefrank	Wed, 24 November 2004 01:44
	Re: 1G-GTE Camshafts...	Looonie	Wed, 24 November 2004 01:47
	Re: 1G-GTE Camshafts...	justcallmefrank	Wed, 24 November 2004 01:53
	Re: 1G-GTE Camshafts...	Norbie	Wed, 24 November 2004 01:46
	Re: 1G-GTE Camshafts...	Looonie	Wed, 24 November 2004 01:52
	Re: 1G-GTE Camshafts...	HyDrA	Wed, 24 November 2004 02:04
	Re: 1G-GTE Camshafts...	Looonie	Wed, 24 November 2004 02:05
	Re: 1G-GTE Camshafts...	HyDrA	Wed, 24 November 2004 02:17
	Re: 1G-GTE Camshafts...	indian	Wed, 24 November 2004 02:40
	Re: 1G-GTE Camshafts...	thechuckster	Wed, 24 November 2004 02:46
	Re: 1G-GTE Camshafts...	M.W.P.	Wed, 24 November 2004 02:48
	Re: 1G-GTE Camshafts...	indian	Wed, 24 November 2004 03:00
	Re: 1G-GTE Camshafts...	thechuckster	Wed, 24 November 2004 03:12
	Re: 1G-GTE Camshafts...	Looonie	Wed, 24 November 2004 03:29
	Re: 1G-GTE Camshafts...	thechuckster	Wed, 24 November 2004 04:09
	Re: 1G-GTE Camshafts...	MR 1JZ	Wed, 24 November 2004 03:31
	Re: 1G-GTE Camshafts...	Looonie	Wed, 24 November 2004 03:35
	Re: 1G-GTE Camshafts...	MR 1JZ	Wed, 24 November 2004 03:56
	Re: 1G-GTE Camshafts...	Looonie	Wed, 24 November 2004 04:04
	Re: 1G-GTE Camshafts...	Bugman	Wed, 24 November 2004 04:09

Previous Topic:	Stalling EFI engine
Next Topic:	4AG Smallport Swap-in AW11

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.