| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
Re: Power steering in T18
|
Wed, 24 November 2004 05:20
 
|
 |
Did the T18 use a steering box? If so the column will be no good as there is no bearing in it to support it (the steering box used to support the end).
When i converted steering box to rack n pinion I tried 2 methods,
1. press a bearing into the end of original steering column, cut shaft and weld splined end onto it. - result was dodgy and hassle to engineer.
2. fit a steering column from a car that already had r & p. - again no easy, but less custom fabrication and IMHO much better option.
Cheers
Joel
|
|
|
| | Subject | Poster | Date |
|---|
 |
Power steering in T18
|
nabs478 | Wed, 24 November 2004 03:35 |
|
Re: Power steering in T18
|
Norbie | Wed, 24 November 2004 03:42 |
|
Re: Power steering in T18
|
CLG | Wed, 24 November 2004 03:46 |
|
Re: Power steering in T18
|
nabs478 | Wed, 24 November 2004 03:56 |
|
Re: Power steering in T18
|
TurboRA28 | Wed, 24 November 2004 05:20 |
|
Re: Power steering in T18
|
ae95 | Wed, 24 November 2004 05:25 |
|
Re: Power steering in T18
|
mrshin | Wed, 24 November 2004 08:17 |
|
Re: Power steering in T18
|
gearb0x | Wed, 24 November 2004 09:55 |
|
Re: Power steering in T18
|
river | Wed, 24 November 2004 20:50 |
|
Re: Power steering in T18
|
TurboRA28 | Wed, 24 November 2004 22:01 |
|
Re: Power steering in T18
|
nabs478 | Wed, 24 November 2004 23:22 |
|
Re: Power steering in T18
|
mrshin | Thu, 25 November 2004 08:17 |
|
Re: Power steering in T18
|
nabs478 | Thu, 25 November 2004 23:38 |
