Location: Sunshine Coast(Buderim)
Registered: October 2004
Re: 18RGU
Wed, 24 November 2004 11:25
From memory that pipe on the left hand side goes to the inlet manifold on the 18R-C.
As for the others,unless you have the emission control,the VSV`s(Vacuum Switching Valves)don`t worry,just connect the dissy advance diaphram outer nipple to port J on the 3 port TVSV in the thermostat housing(line 2) out of port K(diagonally across)to hex vacumm port on top of balance pipe(line 0)Front port of TVSV(J)line 5 goes to vertical nipple on No.1 cylinder carbie inlet housing. The inner nipple on the dissy goes to a valve that was originally behind the thermostat housing(port Z on the VCV valve)line marked 1,out of port Y line 0 to 3 port hex valve.
Hope that`s not to confusing,
Regards,
Nort.
Wed, 24 November 2004 11:25
