Toymods Car Club Inc: Parts Wanted => Wanted: MA61 Electronic Dash

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Classifieds » Parts Wanted » Wanted: MA61 Electronic Dash Show: Today's Posts :: Show Polls Email to friend

Author

Topic

bbaacchhyy
Forums Junkie

Location:
Adelaide
Registered:
September 2003

Re: Wanted: MA61 Electronic Dash

Thu, 25 November 2004 00:31

CrUZsida wrote on Thu, 25 November 2004 11:28

bbaacchhyy wrote on Thu, 25 November 2004 04:49

Here is a pic. It is connected to the yellow wire on the six pin connector on the ignitor, and goes to Pin 9 on the plug (black wire) on the back of the cluster. (Plug disconnected to clarify)

The grey wire is the one that is connected diirectly to the plug on the back of the cluster.

So no booster?

Straight from yellow wire on ignitor, splice in grey wire, and connect grey wire to pin 9 (black)?

I currently have pin 6 on the ignitor connected to pin 9 on the dash.
Pin 6 was supposed to be IG-

The yellow wire is one of the -ve coil wires.
So you will have 1/3 the revs yes?

The booster is hiding behind the stereo. (sse latest pics in Members ride section)

Yes. (except now it goes to and from tacho booster)

NFI, that is how it was wired when I got the car.
With the booster connected, I have the revs as per the test function (2k and 5k), but before, yes the revs were low, but don't know by how much.

[Updated on: Thu, 25 November 2004 00:32]

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Fri Jan 10 04:09:48 UTC 2025

Total time taken to generate the page: 0.0098330974578857 seconds

.:: Contact :: Home ::.