F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » fly-cuts :: how deep to dig ?? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Bill Sherwood Forums Junkie Location: Brisbane / Gold Coast Registered: May 2002	Re: fly-cuts :: how deep to dig ?? Mon, 28 October 2002 01:58 Depends on the piston, ie, if it's forged then 2.5mm should be thick enough for the metal on the top to hang together, and if it's cast then 3mm would be better. If you're running boost, then add about 0.5mm to that. You need a clearance of 0.060" minimum from valve-to-piston at all times. [Report message to a moderator]

	Subject	Poster	Date
	fly-cuts :: how deep to dig ??	ed_ma61	Sun, 27 October 2002 14:17
	Re: fly-cuts :: how deep to dig ??	allencr	Sun, 27 October 2002 15:42
	Re: fly-cuts :: how deep to dig ??	Youngy	Mon, 28 October 2002 00:06
	Re: fly-cuts :: how deep to dig ??	Bill Sherwood	Mon, 28 October 2002 01:58
	Re: fly-cuts :: how deep to dig ??	ed_ma61	Mon, 28 October 2002 10:42
	Re: fly-cuts :: how deep to dig ??	ed_ma61	Mon, 28 October 2002 11:04

Previous Topic:	HKS Super AFR vs APEXi Super AFC
Next Topic:	7M vs 5M intake manifold

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.