Location: south east - melbourne
Registered: March 2004
Re: Soarer stud pattern
Fri, 26 November 2004 05:15
SOARER pcd is 5x114.3
and stock offset is 50mm
its very hard to get aftermarket wheels at 50mm offset so 45 or somewhere close will do 38 also has been used by some people with good results but 38 offset with 8 inch wide rim will not fit an oldschool soarer ive alredy tried it will stick out the guards in the front making it impossible to lower
for lowering purposes get a 45mm offset with 7 inch wide wheels
or 50mm offset then u can go 8 inch wide
Fri, 26 November 2004 05:15
