| Author | Topic |
|---|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: 4AGZE into Ae71
|
Sun, 28 November 2004 03:41
 
|
 |
i currently run T18 gbox, tailshaft and diff. The T18 box has the 20 pline output shaft opposed to the AE71 22 spline, but both being 2 piece shafts it should be ok to combine the two pices.
You will also have to use a 4age flywheel + clutch as the GZE doesnt fir in the T50 bellhousing.
My PERSONAL opinion is screw the whole T series idea and get an F series or G series from Crown or Hilux respectively. Then get a W58 + custom bellhousing + modified tailshaft and NEVER worry about snapage.
You will need to install a pilot bearing. FWD motors dont have them. Cost ~ $2.00
Fuel pump - an intank or JE camira external will do the trick..... plenty of info on doing that.
Wiring.... well there are only a few wires from the engine loom and ECU which connect to the body.
# 12V permanent
# Ignition [EFI MAIN] (relay required - the toyota "silver can style" in the relay box at the battery works well - even labelled too!
# Circ open relay
# Fuel pump wire
# Earth, i think
# Brake lamp
thats about it i think
#
|
|
|
| | Subject | Poster | Date |
|---|
 |
4AGZE into Ae71
|
Teddy_Csx | Sat, 27 November 2004 11:38 |
|
Re: 4AGZE into Ae71
|
ae95 | Sat, 27 November 2004 11:54 |
|
Re: 4AGZE into Ae71
|
Teddy_Csx | Sat, 27 November 2004 11:56 |
|
Re: 4AGZE into Ae71
|
TE72_Turbo | Sun, 28 November 2004 03:29 |
|
Re: 4AGZE into Ae71
|
THE WITZL | Sun, 28 November 2004 03:41 |
|
Re: 4AGZE into Ae71
|
mrshin | Sun, 28 November 2004 07:22 |
|
Re: 4AGZE into Ae71
|
chrizer | Sun, 28 November 2004 08:13 |
|
Re: 4AGZE into Ae71
|
Teddy_Csx | Sun, 28 November 2004 22:21 |
|
Re: 4AGZE into Ae71
|
Teddy_Csx | Mon, 29 November 2004 01:04 |
|
Re: 4AGZE into Ae71
|
chrizer | Mon, 29 November 2004 06:09 |
|
Re: 4AGZE into Ae71
|
Teddy_Csx | Mon, 29 November 2004 10:40 |
