| Author | Topic |
|---|
Location:
South Eastern Subs
Registered:
March 2004
|
|
Re: Greddy boost cut on 1GGTE
|
Wed, 01 December 2004 23:41
 
|
 |
Look in the Tech section there are full ECU wiring diagrams..That should help you witht he wiring..
As for the boost controller well u need small hands...just joking.  You can get it off its just very tight. Keep trying. For the front turbo you have to take out the dizzy to get to the wastegates..make sure your timing is on TDC on the flywheel before you do this and mark the dizzy rotor pozition before you remove it. As for the back one, well you just have to somehow get your hands in there..use some long nose pliers..
Good luck..
|
|
|
