Toymods Car Club Inc: Tech & Conversions => ke11 disc brake conversion

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » ke11 disc brake conversion Show: Today's Posts :: Show Polls Email to friend

Author

Topic

oldcorollas
Forums Junkie

Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003

Re: ke11 disc brake conversion

Sun, 05 December 2004 11:46

syncro wrote on Sun, 05 December 2004 21:49

i ripped the brakes off my ke70 today, disks,callipers and backing plates, then i ripped off one of my ke 11 front drums and the ke70 backing plates dont bolt up to the ke11 strut!

the bolts in the ke11 strut for the drum backing plate have a 12mm head and are equally spaced apart like wheel studs

the ke70 backing plate bolts are unequally spaced and have 14mm head bolts

im going to get some ke30 or ke55 backing plates tomorrow morning at the wreckers but if they are the same ill have to weld and redrill my ke70 ones.

there are some KE70 ones that DO bolt up (i have them, and i pulled them off the car at the wreckers). i believe they are a SEA (south east asia) variant. they have the long thin pads.
KE10's also have two sizes of bolts holding both the strut to steerign arm, and backing plate to strut..
KE30/55 have the square pattern.. let me know if the KE70 calipers bolt to the KE30 backing plate..

i got some KE70 wagon ones to try, forgetting that they have a larger disc Wink

, but the difference seemed to be in the caliper to backing plate bracket (these were square pad ones).

Cya, Stewart

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Fri May 9 13:41:09 UTC 2025

Total time taken to generate the page: 0.006134033203125 seconds

.:: Contact :: Home ::.