F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » AE101 4A-GZE ignition timing issues. Timing doesnt change going from DIAG mode to normal operation! Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
THE WITZL Forums Junkie Toymods Social Secretary Location: Sydney Registered: July 2002	Re: AE101 4A-GZE ignition timing issues. Timing doesnt change going from DIAG mode to normal operati Sun, 05 December 2004 12:22 I FIXED IT!!! Installed an o2 sensor, connected up the intake air temp sensor (dodgily), wired up a proper tacho and checked everything else... and then.... i set the TPS properly (Toymods tech docs are good), reset the ECU and made sure i was clear of all fault codes (minus AIRCON #51). And it worked It only jumped from 10deg to about 13-14, but you can tell its advancing the timing properly as it moves about whilst staying at the same RPM.... now i have other issues, but lets not go there. [Report message to a moderator]

	Subject	Poster	Date
	AE101 4A-GZE ignition timing issues. Timing doesnt change going from DIAG mode to normal operation!	THE WITZL	Tue, 30 November 2004 13:06
	Re: AE101 4A-GZE ignition timing issues. Timing doesnt change going from DIAG mode to normal operati	Anthony Kellam	Tue, 30 November 2004 14:39
	Re: AE101 4A-GZE ignition timing issues. Timing doesnt change going from DIAG mode to normal operati	THE WITZL	Tue, 30 November 2004 20:53
	Re: AE101 4A-GZE ignition timing issues. Timing doesnt change going from DIAG mode to normal operati	sideshow	Tue, 30 November 2004 21:20
	Re: AE101 4A-GZE ignition timing issues. Timing doesnt change going from DIAG mode to normal operati	THE WITZL	Tue, 30 November 2004 23:30
	Re: AE101 4A-GZE ignition timing issues. Timing doesnt change going from DIAG mode to normal operati	THE WITZL	Sun, 05 December 2004 12:22

Previous Topic:	4A-GZE conversion into 2001 Corolla?
Next Topic:	JZX81 Chassis number

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.