| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
|
Re: 3T-GTE/3T-C
|
Tue, 07 December 2004 11:08
 
|
 |
The bearings are the same physical dimensions, however, the oil feed hole is in a different position, and needs to be re-drilled.
All 3TGTE's that I have seen have had a bypass oil cooler fitted from factory. The oil cooler lines come from the sandwich plate between the block & oil filter (& contains a thermostat), and return to the motor via the thermostat housing bolted to the exhaust side of the head.
Yes, the T18 radiator is sufficient, provided it is in good condition.
Cheers
Phil
|
|
|
| | Subject | Poster | Date |
|---|
 |
3T-GTE/3T-C
|
ToyT18 | Tue, 07 December 2004 10:13 |
|
Re: 3T-GTE/3T-C
|
TE72_Turbo | Tue, 07 December 2004 11:08 |
|
Re: 3T-GTE/3T-C
|
TA22 GT | Tue, 07 December 2004 13:37 |
|
Re: 3T-GTE/3T-C
|
ToyT18 | Wed, 08 December 2004 11:49 |
|
Re: 3T-GTE/3T-C
|
pheonix83 | Sun, 12 December 2004 23:22 |
