| Author | Topic |
|---|
Location:
Brisbane
Registered:
April 2004
|
|
Re: TURBO 18RGEU RA28 CELICA
|
Thu, 09 December 2004 08:25
 
|
 |
|
oring the block is where they cut a grove in your block around each cylinder and then install a pice of wire which is higher than your block height so when you install your new head gasket the wire is bedded into the gasket which stops it from being pushed side ways and venting to the sump also lets me run higher boost for longer periods of time.
|
|
|
| | Subject | Poster | Date |
|---|
 |
TURBO 18RGEU RA28 CELICA (with photos)
|
ra_28 | Mon, 06 December 2004 08:08 |
|
Re: TURBO 18RGEU RA28 CELICA
|
people100 | Mon, 06 December 2004 09:08 |
|
Re: TURBO 18RGEU RA28 CELICA
|
gold28 | Tue, 07 December 2004 10:11 |
|
Re: TURBO 18RGEU RA28 CELICA
|
brett_celicacoupe | Wed, 08 December 2004 10:51 |
|
Re: TURBO 18RGEU RA28 CELICA
|
wolverine | Wed, 08 December 2004 12:58 |
|
Re: TURBO 18RGEU RA28 CELICA
|
ra_28 | Thu, 09 December 2004 08:25 |
|
Re: TURBO 18RGEU RA28 CELICA
|
SilverGhost | Thu, 09 December 2004 08:31 |
|
Re: TURBO 18RGEU RA28 CELICA
|
hokey | Mon, 13 December 2004 03:17 |
|
Re: TURBO 18RGEU RA28 CELICA
|
people100 | Mon, 13 December 2004 09:37 |
|
Re: TURBO 18RGEU RA28 CELICA
|
ra_28 | Fri, 17 December 2004 21:53 |
|
Re: TURBO 18RGEU RA28 CELICA
|
ra_28 | Tue, 04 January 2005 10:29 |
|
Re: TURBO 18RGEU RA28 CELICA
|
people100 | Wed, 05 January 2005 09:23 |
|
Re: TURBO 18RGEU RA28 CELICA (with photos)
|
SHEwiththe18RG | Tue, 04 January 2005 12:34 |
|
Re: TURBO 18RGEU RA28 CELICA (with photos)
|
Steve M | Wed, 05 January 2005 13:44 |
|
Re: TURBO 18RGEU RA28 CELICA (with photos)
|
ra_28 | Fri, 07 January 2005 09:30 |
