| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: 6M Crank vibration !!
|
Fri, 01 November 2002 20:38
 
|
 |
Apparently a common problem on the 5/6MG. DO NOT continue driving with the pulley like this......
Take off pulley, and you will see a little key in the crank. This will be half shagged. Remove and replace with a new one (engine reconditioner should be able to supply you with one for a minimal fee). Inspect keyway in crank pulley...this may be shagged too. If so, replace. The crank pulley bolt should be replaced with a new one as this is the source of the problem. Something about overtightening the bolt, stretching, followed by eventual loosening.
Hope this helps.
Cheers Dave.
|
|
|
