| Author | Topic |
|---|
Location:
qld
Registered:
December 2003
|
|
Re: AE86 Coilover. *dimensions*
|
Thu, 16 December 2004 10:58
|
 |
this belongs in tech and conversions. or you can go to www.club4ag.com and read their tech referance.
anyway. usually an ae86 coilover is made from a modified stock strut leg. and using an insert from an ae92 (front) or sw20 mr2 (front or rear). the housing is also shortended, a section cut out below the internal threads then the top piece is welded back on, typically around 30mm. a spacer will be required also (inside the strut leg under the insert).
then the stock spring perch is cut off and a threaded coilover sleeve fitted, usually welded on.
|
|
|
| | Subject | Poster | Date |
|---|
 |
AE86 Coilover. *dimensions*
|
setsuna | Thu, 16 December 2004 04:01 |
|
Re: AE86 Coilover. *dimensions*
|
slydar | Thu, 16 December 2004 10:58 |
