Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Fuel and ignition map for 20V

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
AbaddonGZE
Regular


Location:
Sydney
Registered:
July 2002
 
Re: Fuel and ignition map for 20V Sat, 02 November 2002 09:08 Go to previous messageGo to previous message
heheh ive got to get it in first Smile

the 20V is on an engine stand at the moment.. ive got to sell my sprinter so ive got the dollars for the 20v exhaust.

yeah you will find the throttle bodies of any EFI car are usually oversized somewhat.. the microtech TPS map only goes to 65%.. so I guess after the butterfly is 60% or so open it dosent make any difference opening it further.

As for idle problems.. its hard to get any engine with an aftermarket computer to idle properly if it doesnt have closed loop idle control.
If you use a map sensor it is more forgiving to load changes.. and you can use a idle-up solonoid to let some more air around the bypass.. you wire it up to open when the thermo comes on.. that way it will also work for the A/C (as the fan runs all the time when the A/C compressor runs)\

If you use an idle-up solonoid by itself with TPS control, when it opens it will just lean it out slightly.. which wont usually result in increasing the idle.
So to get around this you also put a resistor across the TPS sensor that "fools" the computer into thinking the throttle is slightly open.. thus increasing the fuel as well.
(The TPS is just a variable resistor).
I havent done any calculations to work out what size resistor to use but it woudlnt be that hard to work out if need be.

  Send a private message to this user    

SubjectPosterDate
Read Message   Fuel and ignition map for 20V AbaddonGZEThu, 31 October 2002 00:50
Read Message   Re: Fuel and ignition map for 20V gt20vThu, 31 October 2002 15:58
Read Message   Re: Fuel and ignition map for 20V AbaddonGZEFri, 01 November 2002 01:17
Read Message   Re: Fuel and ignition map for 20V gt20vFri, 01 November 2002 13:23
Read Message   Re: Fuel and ignition map for 20V gt20vFri, 01 November 2002 13:26
Read Message   Re: Fuel and ignition map for 20V AbaddonGZESat, 02 November 2002 01:12
Read Message   Re: Fuel and ignition map for 20V gt20vSat, 02 November 2002 07:57
Read Message   Re: Fuel and ignition map for 20V  AbaddonGZESat, 02 November 2002 09:08
Read Message   Re: Fuel and ignition map for 20V gt20vSat, 02 November 2002 14:08
Read Message   Re: Fuel and ignition map for 20V AbaddonGZESun, 03 November 2002 03:12
Read Message   Re: Fuel and ignition map for 20V gt20vMon, 04 November 2002 14:46
Read Message   Re: Fuel and ignition map for 20V AbaddonGZEMon, 04 November 2002 23:17
Read Message   Re: Fuel and ignition map for 20V gt20vTue, 05 November 2002 09:47
Read Message   Re: Fuel and ignition map for 20V AbaddonGZETue, 05 November 2002 10:17
Read Message   Re: Fuel and ignition map for 20V gt20vTue, 05 November 2002 12:53
Previous Topic:SV11 brakes
Next Topic:Polishing Alloy Rims and Rocket Cover

Goto Forum:
-=] Back to Top [=-

Current Time: Mon Jul 28 14:05:12 UTC 2025

Total time taken to generate the page: 0.0045759677886963 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.