| Author | Topic |
|---|
Location:
Brisbane
Registered:
April 2004
|
|
Re: TURBO 18RGEU RA28 CELICA
|
Fri, 17 December 2004 21:53
 
|
 |
|
I think it cost me $40 a bore that was through bryants engineering when u get this done u need to supply them with a head gasket so they can install the ring in the right spot. If you go to acl gaskets over at eagle farm they have the program on there machine already to cut out 18rg gaskets so you can get what ever form of gasket you want they cost $25 a bore.
|
|
|
| | Subject | Poster | Date |
|---|
 |
TURBO 18RGEU RA28 CELICA (with photos)
|
ra_28 | Mon, 06 December 2004 08:08 |
|
Re: TURBO 18RGEU RA28 CELICA
|
people100 | Mon, 06 December 2004 09:08 |
|
Re: TURBO 18RGEU RA28 CELICA
|
gold28 | Tue, 07 December 2004 10:11 |
|
Re: TURBO 18RGEU RA28 CELICA
|
brett_celicacoupe | Wed, 08 December 2004 10:51 |
|
Re: TURBO 18RGEU RA28 CELICA
|
wolverine | Wed, 08 December 2004 12:58 |
|
Re: TURBO 18RGEU RA28 CELICA
|
ra_28 | Thu, 09 December 2004 08:25 |
|
Re: TURBO 18RGEU RA28 CELICA
|
SilverGhost | Thu, 09 December 2004 08:31 |
|
Re: TURBO 18RGEU RA28 CELICA
|
hokey | Mon, 13 December 2004 03:17 |
|
Re: TURBO 18RGEU RA28 CELICA
|
people100 | Mon, 13 December 2004 09:37 |
|
Re: TURBO 18RGEU RA28 CELICA
|
ra_28 | Fri, 17 December 2004 21:53 |
|
Re: TURBO 18RGEU RA28 CELICA
|
ra_28 | Tue, 04 January 2005 10:29 |
|
Re: TURBO 18RGEU RA28 CELICA
|
people100 | Wed, 05 January 2005 09:23 |
|
Re: TURBO 18RGEU RA28 CELICA (with photos)
|
SHEwiththe18RG | Tue, 04 January 2005 12:34 |
|
Re: TURBO 18RGEU RA28 CELICA (with photos)
|
Steve M | Wed, 05 January 2005 13:44 |
|
Re: TURBO 18RGEU RA28 CELICA (with photos)
|
ra_28 | Fri, 07 January 2005 09:30 |
