| Author | Topic |
|---|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: 7mgte into ma70 supra
|
Mon, 20 December 2004 05:06
|
 |
| SupraPete wrote on Mon, 20 December 2004 12:55 |
I'd still reccomend using a jack, that way you can get the EXACT height, then put the bolts in for the gearbox and get the mounts at the front to line up.
Maybe I'm thinking "bolting it up" while your thinking "getting it in".
... Must be the dodgy handlebar moe I was picturing on the guy holding a gearbox up with a peice of rope through the shifter hole.
|
Could be. Good news is its coming back...
But yeah, getting it in, once the mounts are sitting the right place, or close to the right place, then run a jack under the box, bolt the box on, and then go back to the mounts.
|
|
|
| | Subject | Poster | Date |
|---|
 |
7mgte into ma70 supra
|
Bobski | Fri, 17 December 2004 01:32 |
|
Re: 7mgte into ma70 supra
|
snail | Fri, 17 December 2004 03:24 |
|
Re: 7mgte into ma70 supra
|
Bobski | Fri, 17 December 2004 05:57 |
|
Re: 7mgte into ma70 supra
|
Norbie | Fri, 17 December 2004 10:35 |
|
Re: 7mgte into ma70 supra
|
Bobski | Mon, 20 December 2004 01:39 |
|
Re: 7mgte into ma70 supra
|
CrUZsida | Mon, 20 December 2004 03:04 |
|
Re: 7mgte into ma70 supra
|
SupraPete | Mon, 20 December 2004 03:23 |
|
Re: 7mgte into ma70 supra
|
CrUZsida | Mon, 20 December 2004 03:29 |
|
Re: 7mgte into ma70 supra
|
Bobski | Mon, 20 December 2004 03:58 |
|
Re: 7mgte into ma70 supra
|
CrUZsida | Mon, 20 December 2004 04:00 |
|
Re: 7mgte into ma70 supra
|
SupraPete | Mon, 20 December 2004 04:55 |
|
Re: 7mgte into ma70 supra
|
CrUZsida | Mon, 20 December 2004 05:06 |
