| Author | Topic |
|---|
Location:
Sydney
Registered:
July 2002
|
|
Re: Fuel and ignition map for 20V
|
Sun, 03 November 2002 03:12
 
|
 |
Yeah what you do it set all the LOAD maps which are vacuum to 0, then set all the TPS maps up.
like this it will use the TPS for vacuum and the LOAD map for boost. Its covered in the manual.
You can also set the TPS to kick in at a certain RPM.. dont know why you would bother tho.. perhaps to try adn fix the idle.
Positive pressure is impossible on a NA car.. your map sensor is most likely a bit out of calibration.. I dont think you can calibrate the mtechs sensor.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Fuel and ignition map for 20V
|
AbaddonGZE | Thu, 31 October 2002 00:50 |
|
Re: Fuel and ignition map for 20V
|
gt20v | Thu, 31 October 2002 15:58 |
|
Re: Fuel and ignition map for 20V
|
AbaddonGZE | Fri, 01 November 2002 01:17 |
|
Re: Fuel and ignition map for 20V
|
gt20v | Fri, 01 November 2002 13:23 |
|
Re: Fuel and ignition map for 20V
|
gt20v | Fri, 01 November 2002 13:26 |
|
Re: Fuel and ignition map for 20V
|
AbaddonGZE | Sat, 02 November 2002 01:12 |
|
Re: Fuel and ignition map for 20V
|
gt20v | Sat, 02 November 2002 07:57 |
|
Re: Fuel and ignition map for 20V
|
AbaddonGZE | Sat, 02 November 2002 09:08 |
|
Re: Fuel and ignition map for 20V
|
gt20v | Sat, 02 November 2002 14:08 |
|
Re: Fuel and ignition map for 20V
|
AbaddonGZE | Sun, 03 November 2002 03:12 |
|
Re: Fuel and ignition map for 20V
|
gt20v | Mon, 04 November 2002 14:46 |
|
Re: Fuel and ignition map for 20V
|
AbaddonGZE | Mon, 04 November 2002 23:17 |
|
Re: Fuel and ignition map for 20V
|
gt20v | Tue, 05 November 2002 09:47 |
|
Re: Fuel and ignition map for 20V
|
AbaddonGZE | Tue, 05 November 2002 10:17 |
|
Re: Fuel and ignition map for 20V
|
gt20v | Tue, 05 November 2002 12:53 |
