what are these? Please help with identification of sensors
Wed, 22 December 2004 10:34
Hi Guys,
Bit of a problem with my 87 supra overheating (mentioned in another post) and just to weed out which things might be causing it, I have purchased a cheapo temperature guage to double check if my guage is a dud (which I suspect it is). But I have run into a few problems while installing it.
It's not the actual installation that is a problem, I'm pretty sure I've sorted out which is the temperature sensor, but I found a few broken or corroded ones as well.
If anybody can help me identify what these are/do I would greatly appreciate it.
Now I'm pretty certain the yellow circle is the temperature sensor as it appears to be the only single wire connection.
The one above it (in red) - what is that one. I went to remove it and the whole damned thing popped off leaving two soldered bits of copper and it was all corroded and is now not overly soldered and my car now displays an engine problem light when I start it up. Please help me out...
The following photo I have no idea what that is. There was a hose attached to a plastic bit but that broke off so the hose is now disconnected.
what are these? Please help with identification of sensors
Wed, 22 December 2004 10:34
