| Author | Topic |
|---|
Location:
Brisbane
Registered:
July 2004
|
|
Re: 2JZ-GE conversion- info pls anyone!!
|
Thu, 23 December 2004 05:15
 
|
 |
Very nice gianttomato, kinda looks like an RX-3, but better IMO.i've never even seen one of those old coronas getting about before..Dig the inside wheel lift action on that 3rd pic 
Yep, CrUZsida, i've a fair idea about your opinion  , was just posting here aswell cos not everyone goes to the cressida forums, sadly..
I wouldn't be doing anything extreme with it- retain standard auto, swap over my current cat back exhaust, maybe some cold air induction, certainly nothing to put your corona to shame with 
But even tho all indications are its probably one of the easiest engine conversions around, its still a big step for someone who hasn't so much as taken a head off a motor before, (although if i dont go with this conversion, that will have to change since if you haven't guessed already 7M, overheating= head gasket (or cracked head...), and i dont have any mates that have done this sort of thing either
I would consider myself handy with a spanner, i've got all the equipment (except a hoist and decent torque wrench (mines a $30 cheapie), plus i've soldered plenty of stuff before - mainly car audio (although most memorable was building 2 led tachometer kits), but seems to be a far cry from someone who would know what they are doing ,
Would it be possible to do this swap over say 2 weeks if i worked on it whenever possible (like there shouldn't be any MAJOR dramas with wiring so long as i nut out the MX83 diagrams and track down a 2JZGE one beforehand, right??)
|
|
|
| | Subject | Poster | Date |
|---|
 |
2JZ-GE conversion- info pls anyone!!
|
capableronTRD | Wed, 22 December 2004 11:09 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
BlackSupra | Wed, 22 December 2004 11:32 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
gianttomato | Wed, 22 December 2004 12:31 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
7mgtema71 | Wed, 22 December 2004 22:36 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
capableronTRD | Thu, 23 December 2004 02:05 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
gianttomato | Thu, 23 December 2004 02:08 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
capableronTRD | Thu, 23 December 2004 02:13 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
gianttomato | Thu, 23 December 2004 02:45 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
rob_RA40 | Thu, 23 December 2004 03:12 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
CrUZsida | Thu, 23 December 2004 03:20 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
capableronTRD | Thu, 23 December 2004 05:15 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
gianttomato | Thu, 23 December 2004 15:45 |
|
Re: 2JZ-GE conversion- info pls anyone!!
|
7mgtema71 | Thu, 23 December 2004 23:12 |
