F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Internal wastegate too small! Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
YelloRolla Forums Junkie Location: On your mum! Registered: May 2002	Re: Internal wastegate too small! Sun, 26 December 2004 00:41 I will be inclined to go with mrshin here - it is too easy for the flapper valve to be caught on something which is holding it from opening. I don't see a comp wheel big enough fitting in the CT20 housing to be completely beyond the stock wastegate's ability to control it to some degree. I used to completely block (fuel line clamp) the wastegate signal with my stock CT20 and it didn't go much beyond about 18psi. [Report message to a moderator]

	Subject	Poster	Date
	Internal wastegate too small!	KoinTA22	Sat, 25 December 2004 10:49
	Re: Internal wastegate too small!	CLG	Sat, 25 December 2004 11:02
	Re: Internal wastegate too small!	ke382TG	Sat, 25 December 2004 11:03
	Re: Internal wastegate too small!	wilbo666	Mon, 27 December 2004 07:51
	Re: Internal wastegate too small!	ae95	Sat, 25 December 2004 11:31
	Re: Internal wastegate too small!	mrshin	Sat, 25 December 2004 12:38
	Re: Internal wastegate too small!	YelloRolla	Sun, 26 December 2004 00:41
	Re: Internal wastegate too small!	KoinTA22	Sun, 26 December 2004 03:52
	Re: Internal wastegate too small!	KoinTA22	Sun, 26 December 2004 03:52
	Re: Internal wastegate too small!	KoinTA22	Sun, 26 December 2004 03:56
	Re: Internal wastegate too small!	KoinTA22	Mon, 27 December 2004 05:31

Previous Topic:	Not starting when hot
Next Topic:	Broken Tail light

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.