| Author | Topic |
|---|
Location:
venezuela
Registered:
December 2004
|
|
Re: microtech problem no sparks...please help!!!!
|
Tue, 28 December 2004 03:49
 
|
 |
|
Hi friends and thanks again for your help.., yes i put the osciloscope in the injectors wiring..., no pulses...,all grounds are good, the power stay at microtech and the coil..., (12volts)when i cranck the engine...., the car has a external igniter, ignition coil and tdc sensor inside (built in) the distributor, i check the sparks crancking the engine with a spark plug wire conected to the secundary terminal of the coil with 1 spark plug earthed without the distribuitor cap, if i put the handset in "TEST MODE" with this method..., have a great sparks and injectors pulses good.., the green led and the ambar led stays brigth on without blinking and the red led never..., i am very confused with this problem.. today im faxed the wiring diagram of the car to the microtech dealer...., thanks again...
|
|
|
