Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 1jz coolant leak

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
Manny
Forums Junkie


Location:
Sydney
Registered:
May 2002
Re: 1jz coolant leak Thu, 30 December 2004 09:13 Go to previous messageGo to previous message
There are a couple of coolant return lines from the turbo cooling system on the main return pipe that runs alongside the passenger side of the block. This main pipe hooks up to the rear of the water pump. The heater return hose also connects to the rear of the main pipe before it bends behind and around the block.
There's also a drain plug mid/rear of the block for draining/flushing the blocks coolant.
The other alternative is a dud welch plug on that side of the engine....

Your best bet is to get the car up on jacks, remove the under covers and poke around with a flashlight until you pinpoint the source.
  Send a private message to this user    

SubjectPosterDate
Read Message   1jz coolant leak tyottsoarerWed, 29 December 2004 08:54
Read Message   Re: 1jz coolant leak dravenWed, 29 December 2004 09:10
Read Message   Re: 1jz coolant leak tyottsoarerWed, 29 December 2004 09:16
Read Message   Re: 1jz coolant leak tyottsoarerThu, 30 December 2004 04:04
Read Message   Re: 1jz coolant leak Chris DaveyThu, 30 December 2004 05:29
Read Message   Re: 1jz coolant leak DanishThu, 30 December 2004 07:41
Read Message   Re: 1jz coolant leak tyottsoarerThu, 30 December 2004 07:51
Read Message   Re: 1jz coolant leak  MannyThu, 30 December 2004 09:13
Read Message   Re: 1jz coolant leak tanmanFri, 31 December 2004 04:06
Read Message   Re: 1jz coolant leak tyottsoarerSun, 02 January 2005 15:37
Read Message   Re: 1jz coolant leak Chris DaveyMon, 03 January 2005 07:50
Read Message   Re: 1jz coolant leak tyottsoarerMon, 03 January 2005 12:19
Read Message   Re: 1jz coolant leak Chris DaveyMon, 03 January 2005 21:53
Previous Topic:Can sump gasket goo be used on a gearbox?
Next Topic:82.0mm head gasket on 81.5mm bore?

Goto Forum:
-=] Back to Top [=-

Current Time: Sat Jul 19 12:46:03 UTC 2025

Total time taken to generate the page: 0.004270076751709 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.