Toymods Car Club Inc: Tech & Conversions => MAP Sensors and Airflow meters.

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » MAP Sensors and Airflow meters. Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Dodgy_Haro
Forums Junkie

Location:
Brisbane
Registered:
July 2002

Re: MAP Sensors and Airflow meters.	Tue, 05 November 2002 09:00

It's a little black box that hangs on the firewall of the Sprinter but in an AE82, actually hangs off the struct brace in the import model if I do recall. You can't miss it though as it's a small black box with three wires coming out bound as a single wire with a yellow plug at the end. There is also a nozzle on it with a thin rubber hose that attaches to the engine. It doesn't say MAP sensor but rather something else ... don't have mine with me at the moment so can't say. Just recall that it didn't say MAP but something like pressure measure / knock sensor? If you need a pic, there's one on Bill's site but that's for a Sprinter: http://www.billzilla.org/4agstock.htm Hope that helps! [Report message to a moderator]

Current Time: Sat Jul 26 00:46:03 UTC 2025

Total time taken to generate the page: 0.20688509941101 seconds

.:: Contact :: Home ::.