| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: 1uz on microtech miss
|
Sat, 08 January 2005 06:09
 
|
 |
are you sure the TPS is OK? or are you letting your foot off as the engine falters?
if you're simply depressing it down and the engine stumbles at circa 3k rpm then why does the TPS suddenly drop to 0%?
if the pump wasn't up to it, you'd think that any fuel consumption over/above the stumble point woudl be just as bad - an AFR log would show up any lack of fuel (e.g. will run lean above stumble point)?
cheers, charles.
|
|
|
| | Subject | Poster | Date |
|---|
 |
1uz on microtech miss
|
CrUZsida | Thu, 06 January 2005 02:14 |
|
Re: 1uz on microtech miss
|
..J.. | Thu, 06 January 2005 05:08 |
|
Re: 1uz on microtech miss
|
CrUZsida | Thu, 06 January 2005 05:13 |
|
Re: 1uz on microtech miss
|
Skip | Thu, 06 January 2005 08:26 |
|
Re: 1uz on microtech miss
|
CrUZsida | Thu, 06 January 2005 08:28 |
|
Re: 1uz on microtech miss
|
CrUZsida | Thu, 06 January 2005 08:32 |
|
Re: 1uz on microtech miss
|
CrUZsida | Fri, 07 January 2005 00:32 |
|
Re: 1uz on microtech miss
|
Skip | Fri, 07 January 2005 01:37 |
|
Re: 1uz on microtech miss
|
CrUZsida | Fri, 07 January 2005 11:03 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 08 January 2005 03:43 |
|
Re: 1uz on microtech miss
|
Skip | Sat, 08 January 2005 05:48 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 08 January 2005 05:53 |
|
Re: 1uz on microtech miss
|
thechuckster | Sat, 08 January 2005 06:09 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 08 January 2005 06:12 |
|
Re: 1uz on microtech miss
|
thechuckster | Sat, 08 January 2005 06:41 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 08 January 2005 06:52 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 07 May 2005 05:13 |
|
Re: 1uz on microtech miss
|
takai | Sat, 07 May 2005 07:11 |
